Opinions please on this Zenith console
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Hi all,
I know everyone has an opinion and ultimately I will have to make the choice on the purchase, but I would appreciate your input on this Zenith 9s263 console.
I have heard it play and it sounds wonderful! The triangle shaped robot dial is my favorite style. The shape is unique but as you can see in the pics the top has some issues. There are various scratches and scrapes on the rest of the cabinet as with most consoles. And there is one veneer chip on the right rear about half way up. I also believe the adjustable cone is missing from the speaker. Grille cloth is a replacement. Oh yes, the bottom center knob is not original.
It has motorized tuning which also works well. All subsidiary dials appear to be fully functional. Reception during the day was quite impressive AND it DOESN'T use the 6X5 rectifier
OK, the price is $450........however I can trade another Zenith console I have towards it reducing the price by $100. I paid $50 for the one to be traded.
So what say you?
[Image: http://i1185.photobucket.com/albums/z345...9s263c.jpg]
[Image: http://i1185.photobucket.com/albums/z345...9s263f.jpg]
[Image: http://i1185.photobucket.com/albums/z345...9s263k.jpg]
[Image: http://i1185.photobucket.com/albums/z345...9s263i.jpg]
[Image: http://i1185.photobucket.com/albums/z345...9s263a.jpg]
[Image: http://i1185.photobucket.com/albums/z345.../9s263.jpg]
[Image: http://i1185.photobucket.com/albums/z345...9s263j.jpg]
[Image: http://i1185.photobucket.com/albums/z345...9s263d.jpg]
[Image: http://i1185.photobucket.com/albums/z345...9s263b.jpg]
[Image: http://i1185.photobucket.com/albums/z345...9s263e.jpg]
Gene
Admin Note: Fixed the image link to the dial picture.
(This post was last modified: 05-02-2012, 03:19 PM by Gene Pederson.)
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
I have 9S262. (for all intents and purposes they are the same; 262's sides are not rounded).
In a very nice condition to be restored. Did not pay cheap, but certainly not $450. More like 300. And then I was a bit unwilling to haggle much. I think I could bring it down a bit more.
(This post was last modified: 05-02-2012, 04:54 PM by morzh.)
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
Well, as you noticed, it is missing the acoustic adapter, one of the knobs is incorrect, and the grille cloth is incorrect. All of that combined with the cabinet flaws makes the price higher than I would want to pay.
On the plus side it is a 9 tube 1938 shutter dial with motorized tuning and that cabinet is not very common; you'll see a lot more 262's than 263's. The acoustic adapter shouldn't be too hard to find, the missing knob is available as an original or nice reproduction, and (I saved the best for last) the grille cloth for this style set (both the swirl and the block pattern) will soon be on the streets again when Kenny Richmond debuts his new supply of grille cloth.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
(This post was last modified: 05-02-2012, 09:08 PM by Eliot Ness.)
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Thanks to the admin for the pic fix!!
Thanks guys! The top looks worse in the pics than I thought it was looking at it in person. Having grille cloth again will be very nice!
I do know where there is a 262 that is missing the whole speaker, grille cloth and knobs..........but it's only $50!
I must have gotten hypnotized by that motorized tuning.
Gene
(This post was last modified: 05-02-2012, 10:07 PM by Gene Pederson.)
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
I will have to fix motorized tuning in mine - I was told the motor runs but the arrow does not move. Could be gears...could be, the motor does not run.
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
(05-02-2012, 10:04 PM)Gene Pederson Wrote: ......I must have gotten hypnotized by that motorized tuning.... They can do that ! '38 is one of my favorite year Zenith chassis because of the motorized tuning and shutter-dial. I still have my first '38, a 9-S-262 I picked up complete for $25 many, many moons ago at the now defunct Washington Court House, Ohio flea market.
(05-02-2012, 10:39 PM)morzh Wrote: I will have to fix motorized tuning in mine - I was told the motor runs but the arrow does not move. Could be gears...could be, the motor does not run. If the motor does in fact run then it is probably just the motor drive belt. That chassis uses two belts, one for the motor and one for the tuning and it isn't unusual to have one or both needing replacement. Some guys make their own, some find the right size "O" rings to use, and some order belts from Adams:
http://adamsradio.com/page1.html
http://www.alanjesperson.com/gn_repro.ht...al%20Belts
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Eliot,
Thanks for heads up. Once I finish my AA5 Zenith 6G001, (just restored a quad electrolytic cap) this is my next project. Can't wait. Never saw a motorized drive before.
Posts: 4,705
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
(05-03-2012, 09:23 AM)morzh Wrote: Eliot,
Thanks for heads up. Once I finish my AA5 Zenith 6G001, (just restored a quad electrolytic cap) this is my next project. Can't wait. Never saw a motorized drive before.
Motorized dials were quite common on the higher end sets from about 1937 to 1940 or so. The Zenith system is quite crude compared to an RCA, the RCAs have presets for the various stations, that Zenith just has a spring loaded switch that you press to move the dial, and I believe that you need to flick another to make it go in reverse. If the motor isn't working then it's likely dried out grease, a blown fuse, a bad motor run cap, or a wiring problem.
Regards
Arran
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco 46-420 Code 121 Reception issues
|
Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
Philco 46-420 Code 121 Reception issues
|
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
Philco 42-1008 conversion kit
|
Interesting. I haven't seen that before.klondike98 — 07:02 PM |
12' Philco
|
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM |
Shadow Meter Bulb
|
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
Shadow Meter Bulb
|
Ok. Thanks for the correction.RossH — 03:09 PM |
Model 28L
|
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM |
37-60 revision 6
|
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM |
Shadow Meter Bulb
|
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM |
Hickok AC51 tube tester
|
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM |
Who's Online
|
There are currently 2771 online users. [Complete List] » 2 Member(s) | 2769 Guest(s)
|
|
|
|