Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Magnavox Regency Symphony 155-B
#16

Boy, that's the best comparison I've ever seen from one cloth to the other. My prewar Belvedere has just a little scrap of the original cloth. Since the original cloth is OK on both my 37 and 38 690 Philcos, I can use some of my Philco ribbed on the Maggie Belvedere.
#17

        I have a Magnavox 151-B, a Magnavox 155-B, and a Magnavox 355-H.
I saw a previous post about a link to download owners manuals, but I did not see the actual link.. Does anyone have any suggestions? Thank you very much. Joe
#18

Perhaps you mean this thread?

http://philcoradio.com/phorum/showthread.php?tid=4368

--
Ron Ramirez
Ferdinand IN
#19

Wow! Ron, Thanks so much, your the greatest! Joe
#20

Just picked up an identical unit on Saturday. Will need some work, especially the cabinet which looks like a dog was hungry for the edges. What a miracle this Restorafinish stuff is. At least it hides the missing mahogany color. I know it is working since the guy I bought it from powered it up and I heard an AM station. The RC has been changed from the original to a Webcor (can't find the model #). I'm thinking that this was a change out by the dealer since a matching motor board is installed. Never seen this changer before. It has a revolving platform for the 3 sizes of records which holds them up and then pushes one off. Has auto shutoff too and 3 speed. As I recall, WC made the first changers Maggie used, and Webcor followed WC. Has an old EV38 cartridge which still works. I'm really anxious to get this thing powered up and see what it sounds like on records. Would love to get a hold of one of their FM tuners to put on the shelf below the main radio chassis. I used to have one of their old consoles which actually had that separate FM tuner, but it is long gone after getting rid of nearly everything in IL to move to TX 4 years ago. Will hope to post some pictures of this as I get it restored. Grille cloth missing completely from right side, so will replace both sides with something from probably Antique supply out in AZ.
#21

I don't remember whee my 155B went, it disappeared in '72.

Mike
#22

Back to the Maggie R-S issues. In the last week, there have been two Magnavox Regency-Symphony sets in CL for sale.

One was reasonably correct, but the other was so butchered up, it was a very sad joke. The control panel and receiver chassis appears to have been from a Maggie Windsor. Too large for the smaller R-S cabinet. rear view showed the correct amplifier for the R-S chassIs, with the 4-6V6 power amps. The phono compartment was removed from the cabinet, and a few smaller speakers replaced the phono compartment. there was a big hole where the speaker had been (whatever it actually was), though the ad told that it had been a 15 inch.....not correct for a Regency Symphony, anyway. The R-S and Belvedere models used 2-12 inch speakers. Probably the correct R-S chassis had been replaced because the chassis in the cabinet had the FM band on it, and the earlier R-S sets didn't have the FM on the main receiver chassis. Later R-S sets did have a later receiver chassis with the FM band in them, and were single chassis sets. this thing had been the product of some self-styled "engineer", who made pure junk out of it.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
trying to identify this wire type
Thanks to all for the feedback. As Arran said, it is probably an older replacement and yes it has a grid cap so I will ...georgetownjohn — 09:32 PM
trying to identify this wire type
It's possible that the red wire, actually a grid cap lead, is a very old replacement, I can't remember seeing a pre 1939...Arran — 09:18 PM
Gilfillan Brothers Car Radio?
Hi everyone,  Special thanks to Joe Rossi for tracking down this obscure radio and thanks to others who took up the hun...Antipodal — 08:15 PM
trying to identify this wire type
Here's one source for your wire of many. Take care and BE HEALTHY! Gary P.S. Can't get the right color you need? I ...GarySP — 06:40 PM
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM

[-]
Who's Online
There are currently no members online.

>