[DKinYORKpa]

On my Riders, for the alignment it says to refer to the "illustration above for the location of the various compensating condensers." There is no illustration above. The parts layout does assign a numbers to the comp. conds., but I can only find them on the schematic, which isn't enough for me. I would also need to know which trimmer is which on top of the tuning cap. Any help out there?

[tab10672]

http://www.nostalgiaair.org/PagesByModel...029635.pdf Page 2, last paragraph describes where and which are which.

[tab10672]

http://www.nostalgiaair.org/PagesByModel...029633.pdf This is a 50 schematic but the antenna adj are shown which are in the same place as the 51.

[DKinYORKpa]

Thanks-DENNIS