Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 60 not happy to go back in cabinet!
#1

Seems like the cabinet re-entry process is a touchy process, at least for me with my limited experience. Model 60 was working fine on the outside. Now it is howling and oscillating. Even with tube shields. I am wondering if somehow the 42 tube or the 6A7 tubes are shorting out. Any help would be greatly appreciated. This new problem just cropped up.
#2

Crazy. I pulled the 42 and 6A7 and then reinserted. Radio plays. I am wondering about a loose pin contact or something similar. The radio is in the normal position, not on its side or back. Any thoughts on a hit or miss howling, motorboating, oscillating symptoms. Thanks.
#3

Sounds like you should clean up the tube pins and sockets with deoxit, you can sweat the pins on the tubes and add a little bit of solder to be sure, retention the contacts of the socket gently with a pick or needle, let everything dry out, and you should be fine.

One more thing, make sure there is nothing hanging down or sagging that will compress to a short when chassis is upright.




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently 1947 online users. [Complete List]
» 1 Member(s) | 1946 Guest(s)
Avatar

>