Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Looking to see if anyone can give me height, width and depth for a 1931 Philco model 90 high boy (one with closing doors on the front). Thanks for your help.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
(This post was last modified: 06-19-2012, 12:34 AM by jerryhawthorne.)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Height - 39-7/8"
Width - 23-15/16"
Depth - 13-5/16"
From Philco Furniture History
--
Ron Ramirez
Ferdinand IN
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Thanks Ron, it may fit real nice where I would like another console. Wife likes the looks of it.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Very good! ![Icon_thumbup Icon_thumbup](https://philcoradio.com/phorum/images/smilies/icon_thumbup.gif) It always makes a positive difference when the wife approves of a radio, especially a console.
--
Ron Ramirez
Ferdinand IN
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Thanks Ron, now that we know it will fit. Well, he says it works, and totally original. Finish from the few pics he posted look good. Need to see some more pics, he missed the top and the speaker. From the front it looks great. Chassis looks good, no rust other than the tube covers but every thing looks original. Wants $250. Is this in the ball park? Bearing in mind, I'm getting older and this may be my last restoration for at least me. How many consoles can you have in your house? I only listen to my radios off my home transmitter, well, we do have a couple of "local" AM stations but other than that, my Scott with a longer antenna for any other AM. I don't need anything with DX capabilities. What do you guys think?
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Quote:hanks Ron, now that we know it will fit. Well, he says it works, and totally original. Finish from the few pics he posted look good. Need to see some more pics, he missed the top and the speaker. From the front it looks great. Chassis looks good, no rust other than the tube covers but every thing looks original. Wants $250. Is this in the ball park? Bearing in mind, I'm getting older and this may be my last restoration for at least me. How many consoles can you have in your house? I only listen to my radios off my home transmitter, well, we do have a couple of "local" AM stations but other than that, my Scott with a longer antenna for any other AM. I don't need anything with DX capabilities. What do you guys think?
I would say $250 is an out in left field price if it still needs an electrical restoration, even if the cabinet is in nice shape. He says it works is meaningless unless he can demonstrate the thing playing, some people's definition of working is a hum coming out of the speaker, or that it was working ten years ago, the old radio equivailent of "Running when parked".
I've gone to look at radios on craiglist that looked minty in pictures but when you look at them in person you find out someone rubbed them down with "Cowards", or some similar product. In one case they took selective shots in a flattering light, just conveniently leaving out the black stain on the top which managed to get at least $50 or so knocked of the price.
The most that I would consider paying for an early 30s console is maybe $125, if it's all complete, the cabinet is in nice shape without needing a refinish, electrically unrestored but either playing or trying to play. I don't know how badly you want this radio but I'm sure that you could find one requiring absolutely nothing for $200 or less, early 30s consoles are just not a high demand radio.
Regards
Arran
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Thanks Arran, I think I will ask for some additional pictures. Just 2 pictures of the front, doors open/doors closed and the chassis. Nothing of the sides/top or speaker. It's about a 600 mile round trip but have other things I could do while in the area. I felt the price was a on the steep side, just wanted to take a sanity check.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I'm not knocking this particular set, the Philco 90 is a decent performer when working right, and apparently the highboy cabinet with doors is rarer then the lowboy cabinet, 20,890 verses 105,740, according to the gallery. This doesn't mean the highboy would be hard to find it just means that it is much less common. If the rest of the cabinet looks as nice as the handful of pictures you already have, and you can get the price down substantially to 1/2 or less then half of that $250 then I think it may be worth going for, although I would not make a 600 mile round trip for that alone.
Regards
Arran
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Well here is a link to the C/L offering. Doesn't look too bad but the pictures are not all and what I would like to see. Thoughts? Also appears to be a lot of variations of the "90". Single ended and double ended outputs. I really can't tell from the pictures of the chassis what it actually is. Can anyone tell?
Jerry
http://inlandempire.craigslist.org/atq/3057609627.html
A friend in need is a pest! Bill Slee ca 1970.
(This post was last modified: 06-22-2012, 05:52 PM by jerryhawthorne.)
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I see that there are a lot of nice radios listed in this area, obviously not all are Philcos but many would be worth looking at if you happened to be in the area. With regards to that 90 highboy, it isn't as minty as it first appears, I see a significant amount of wear around the knobs and a few flakes or water spots out of the finish, it's hard to tell because the lighting is terrible. It isn't a bad radio but it's definately not worth $250 firm, judging by the quantity and quality of radios available in that area I think he will be sitting on it for a while if he doesn't come down in price.
Regards
Arran
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
PT-6 antenna connections
|
Hi Bridcarl
+1 on the others. Pin 6 of the 7C6 is the AVC Diode so it is appropriate that that pin 4 of the coil con...MrFixr55 — 07:30 AM |
462ron
|
Joseph, this is beyond awesome. A lot of thought and engineering went into this and you hit a home run! Now I must save ...462ron — 07:27 AM |
Cannot Adjust an IF Transformer’s cores
|
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM |
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Who's Online
|
There are currently 3626 online users. [Complete List] » 3 Member(s) | 3623 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|