Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
I saw a large Philco shouldered tombstone in a shop recently. It is a multiband radio with hexagonal knobs, 8 tubes and big honkin upright transformer on the left side as you are looking at the back. I could see no model ID on the chassis or on the bottom of the case. $60. If I remember correctly it had four bands. I probably should have grabbed it.
After looking for a week I can't determine exactly what I was looking at. Your thoughts please. Thanks.
OK, Now I understand why "eyewitnesses" don't always have the correct info when an accident or crime occurs.
The set is I believe a 97B, 7tubes, three bands and I already screwed it up.
I have damaged the dial. I have read about not cleaning these and I thought the lettering was on the back of the dial, not the front. I use Q-tips a lot to clean radios. I did the dial and got a lot of what I figure is tobacco smaoke off. It was fine and I should have left it, but did one more pass and took part of the lettering off. It is still usable but with one bad area. Have already checked and no repros for this dial. Color me stupid.
Here are some pics.
[Image:
http://i1185.photobucket.com/albums/z345...er/97b.jpg ]
[Image:
http://i1185.photobucket.com/albums/z345...r/97b1.jpg ]
[Image:
http://i1185.photobucket.com/albums/z345...r/97b8.jpg ]
[Image:
http://i1185.photobucket.com/albums/z345...r/97b6.jpg ]
[Image:
http://i1185.photobucket.com/albums/z345...r/97b9.jpg ]
[Image:
http://i1185.photobucket.com/albums/z345.../97b10.jpg ]
[Image:
http://i1185.photobucket.com/albums/z345...r/97b5.jpg ]
[Image:
http://i1185.photobucket.com/albums/z345...r/97b3.jpg ]
[Image:
http://i1185.photobucket.com/albums/z345...r/97b4.jpg ]
[Image:
http://i1185.photobucket.com/albums/z345...r/97b2.jpg ]
Gene
(This post was last modified: 10-02-2012, 06:06 PM by
Gene Pederson .)
Posts: 292
Threads: 17
Joined: Aug 2010
City: Yorkville IL
Almost sounds like a 118B. Did it have a shadow meter?
Glenn
Happily back in Illinois..not.
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Hi Glenn,
I believe it did. It was just above the tuning gang. A small rectangular piece.
Gene
Posts: 292
Threads: 17
Joined: Aug 2010
City: Yorkville IL
Look like this? This was my 118H, but it's the same chassis. This was pre-restore. I forgot to get a picture once it was cleaned up.
Glenn
Attached Files
Image(s)
Happily back in Illinois..not.
(This post was last modified: 10-01-2012, 10:25 AM by
Glenn Roberts .)
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
I think that looks correct. Was $60 a good buy? How do these sets perform?
Gene
Posts: 292
Threads: 17
Joined: Aug 2010
City: Yorkville IL
They are great players! P/P. 42's., 3 gang tuner. I have a 118B in the stack. The problem seems to be when the shadow meter goes bad it stops playing unless a resistor is in place to keep the circuit active. I had 2 chassis and neither one had the resistor. Ron sent a picture to me to show the proper location.
To answer your question, that is a great price especially if the cabinet is in decent shape.
Glenn
Happily back in Illinois..not.
(This post was last modified: 10-01-2012, 10:55 AM by
Glenn Roberts .)
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Thank You for all the info and help Glenn! I will check to see if it is still there.
Gene
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Hello Gene/Glenn: if it had four bands, eight tubes, and is in a shouldered cabinet it probably had an oval dial and is a model 650.
The 650 is an excellent set!!
DEFINITELY worth 60.00
(This post was last modified: 10-01-2012, 11:10 AM by
TA Forbes .)
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Hi TA! And Glenn, I just called and it is still there so they are holding it for me to pick up tomorrow. And the price is $60. So whichever model it is should be good
The only pita I can see is there about 10 of the bakelite block caps in these, right?
Gene
(This post was last modified: 10-01-2012, 11:37 AM by
Gene Pederson .)
Posts: 292
Threads: 17
Joined: Aug 2010
City: Yorkville IL
Please post some pictures when you get it home
Glenn
Happily back in Illinois..not.
Posts: 1,401
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
It would not be a 118 if it has four bands. It might possibly be a 640 or a 650, I'm not that familiar with the 6xx Philcos. At any rate, you better get back there and grab it before someone else does.
Steve
M R Radios C M Tubes
Posts: 1,401
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
Oops, I see TA already said that.
M R Radios C M Tubes
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Well Steve, and everyone I wasn't even close on the description.
See my edit and pics.
Gene
Posts: 1,401
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
Congratulations Gene, that was an excellent buy!
Steve
M R Radios C M Tubes
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yes indeed, an excellent buy!!! The 97 is a three band , seven tube set, so you fooled us!
The 97 is a rare set. Note the production numbers in this site!
I have one, and it is a good set. Do a good electronic resto on yours and your set will pleasantly surprise you.
Does your 97 have a dial that is almost red in color?
Users browsing this thread: 1 Guest(s)
Recent Posts
Philco Model 95 High Boy
So today I get published as I update my collection in the Radio Museum web site. I tried to published pictures of my Phi...slford310 — 08:00 PM
Philco 84 antenna connection
Very simply connect al long piece of wire to that contact for your antenna. A piece 10 to plus 50 feet is no issue dep...slford310 — 07:46 PM
Philco 46-480 Cabinet Restoration
I like it!Burchjburch — 05:57 PM
Philco 46-480 Cabinet Restoration
I knew when I asked the question here, that I just wasn’t satisfied with the darkness of the stain. Today I took some mi...jrblasde — 04:54 PM
Philco 84 antenna connection
I've used a single long wire up as high as possible and away obstacles. The gnd can be connected to a copper water pipe ...Radioroslyn — 03:34 PM
Philco 51-632
Found this today for $10 in the local resale shop. It’s a violation of good procedure but I put it on the variac. It cam...bridkarl — 03:25 PM
Philco 41-221 Restored
Rod
Great job, looks good, no need to refinish to my taste.
It is rare that you see the tenite grill in these in decent...morzh — 03:01 PM
My last cabinet for this year
Beautiful Job!!!! Looks awsomeslford310 — 03:01 PM
Identify Philco Radio
Thank you Terry.dconant — 02:41 PM
Philco 84 antenna connection
Hello Everyone,
I was wondering what was the best way to connect an antenna for testing on my Philco 84. The field co...Ctkid — 01:38 PM
Who's Online
There are currently 4919 online users. [Complete List ]» 1 Member(s) | 4918 Guest(s)