Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

660 Chassis into 640 or 650 cabinet
#1

Will a 660 chassis fit properly into a 640 or 650 tabletop cabinet?

The 660 chassis is clearly punched out for a different tube layout and additional tubes compared to the 640/650, but the dimensions look to be the same. Then there's the dial and control shafts....

Pete AI2V
#2

Hi Pete

No, it will not. The 660 chassis is physically larger than the 640 and 650 chassis. In fact the 660 chassis is the same size as a 116 chassis.

--
Ron Ramirez
Ferdinand IN
#3

Thanks Ron. I had thought I could fill an empty 650 cabinet with a 660 chassis.

Also, welcome back.

Pete AI2V
#4

Thank YOU, Pete. Icon_biggrin

For whatever reason, Philco did not make Model 660 (or 665) available as a tombstone in 1936 - only as consoles. Yet the 116 WAS available as a tombstone. Strange.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 40-120C Restoration
Not my radio just trying to help. DavidDavid — 02:48 PM
Philco 91 Restore Code ??
Thanks Rod. Since the screen grid is not tied to the plate then my tubes are pentode right? I see the candohm ties to th...dconant — 02:29 PM
Philco 91 Restore Code ??
Yes, you can look at the schematic. When the output tube screen grid is connected directly to the plate then it's wired ...RodB — 01:51 PM
Philco 91 Restore Code ??
Can someone tell me if my 42 tubes are connected triode or pentode in fixed or cathode bias? How could I tell by looking...dconant — 10:47 AM
Philco 40-120C Restoration
Hello David, that is great news about the tubes source being local ! Sounds like you got good start on the radio . ...radiorich — 09:41 AM
An attempt to remove the Field Coil from a G speaker
Mike; I've only run into a speaker with an open filed coil twice, and they were on newer speakers from the 1940s. One ...Arran — 12:48 AM
An attempt to remove the Field Coil from a G speaker
Arran Yes, this is my plan for now and what do I got to lose, this is not even the speaker from this radio, but one o...morzh — 10:44 PM
An attempt to remove the Field Coil from a G speaker
Mike;  I would unwrap the field coil, and see if maybe there a break near one of the ends, like where the coil wire att...Arran — 10:23 PM
An attempt to remove the Field Coil from a G speaker
...and this is what I did. I fed a little LT into the screwholes with a small brush, and a little on the rim next to the...morzh — 09:52 PM
Philco 40-120C Restoration
I combined the two 40-120C threads together as we like to keep the discussion of the same radio together. It helps with...klondike98 — 09:36 PM

[-]
Who's Online
There are currently 2914 online users. [Complete List]
» 1 Member(s) | 2913 Guest(s)
Avatar

>