Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

38-116 code 125 missing osc. coil 32-2627 and tuning prob.
#1

First time phorum question... This beautiful old set had it's SW band #3 osc. coil removed during WWII, part # 32-2627...Original owners son has a paper by US Gov't telling him that now that the war is over, they are sorry but they can't find his coil...Now trying to find one...The other SW coils are there, but they were disconnected..Also, after recapping this old timer, I find that on AM BC band, it will not tune below 790 Khz...WGY at 810 is good and we have another local station, WROW at 590 which is silent...I've replaced most every cap except the 400uuf one that is only in circuit in BC position....Any ideas on what may be wrong?

Thanks...Don
#2

Don, Can't help you with the osc. coil, maybe some of the parts suppliers like Gary at Play things of the past may be able to help.
A scan of the mentioned paper from the government would be extremely interesting. Any chance you could get it long enough to scan it?
Thanks, Rick
#3

Can't hurt to ask....I'll see what I can do...




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 3626 online users. [Complete List]
» 2 Member(s) | 3624 Guest(s)
AvatarAvatar

>