Posts: 227
Threads: 60
Joined: Sep 2012
City: Kokomo, Indiana
Since I started this hobby early this summer, I have noticed that the largest majority of the 1930's and early 40's wooden radios I see in antique shops, on Craigslist, or elsewhere are Philcos. What are your opinions on why this is? I live in central Indiana. Is this a regional thing? Did Philco sell that many more radios than anyone else? Were the Philcos better made so they lasted longer? Just curious.
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Yes. a lot of sets made, and yes, price point and value and pretty well made and good performers even today when properly maintained. I reckon they had pretty good distribution in the US and Canada, and also had export partners elsewhere.
So you can get a common old Philco set for a few dollars and have some fun and keep your mind active whilst restoring it, and if you are extremely lucky, you might break even if you wish to sell it in the future. The kids don't want it, trust me.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
What Codefox said.
Philco was the USA's leading radio manufacturer from 1930 onward, so it is natural to find more Philco sets than other brands.
--
Ron Ramirez
Ferdinand IN
Posts: 181
Threads: 0
Joined: Mar 2008
City: Pocasset, MA
For 1934, when other manufacturers were still eating Philco's dust, Philco sold 1,250,000 radios. The next-best maker (RCA) sold 500,000, followed by Crosley, General Household Utilities (auto radios) and Sears Roebuck at 300,000 each, three more at 200,000 and the rest at 100,000 or less.
Not too shabby for a company that only began making radios in 1928.
Posts: 4,875
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
I remember someone telling me what the top four manufacturers were in Canada during the 1930s but I'm not sure of the order. The largest, beyond a shadow of a doubt, was Rogers-Majestic/Canadian Radio Corporation, they sold one of every four radios made in this country, under the Rogers name, Majestic, or DeForest-Crosley. I'm sure that next in line would be Philco followed by RCA or Canadian General Electric, then either Marconi or Canadian Westinghouse, and then Grimes-Phonola/Electrohome. Finding the statistics maybe more difficult, in this region you would think that General Electric was the largest followed by Philco, then Deforest-Crosley, RCA, Westinghouse, and Sparton, because of the dealerships they had.
Regards
Arran
Posts: 73
Threads: 11
Joined: Feb 2012
I have many editions of a magazine called Radio Weekly from 1935-1940 it was the Bible of the Radio distribution and sales industry.
It also included electrical white goods such as refrigerators, stoves and ironers. Without question the leaders at the time were:
Philco
GE
Crosely
RCA
Zenith
Tier 2 included:
Westinghouse
Motorola
Fada
Posts: 227
Threads: 60
Joined: Sep 2012
City: Kokomo, Indiana
Thanks that's exactly what I was looking for. Some historical perspective on the times. It's interesting. I have always, since I was a teenager, been interested in the 1930's. Movies and especially the machinery. Cars (I used to own a 1939 Oldsmobile), aircraft, ships etc. etc. One of my favorite documentaries of all time was one I saw about the 1939 world's fair. It had a lot of original footage. Another favorite of mine is Jean Shepherd, an author who grew up in Hammond Indiana in the 30's and wrote many hilarious stories about that time. The movie "Christmas Story" about the kid wanting a Red Ryder BB rifle is based on several of his stories. I sometimes think that perhaps in a previous life I must have been hanging around at that time. I guess it was inevitable that at some point I'd start collecting 1930's radios.
Posts: 438
Threads: 15
Joined: Jul 2008
City: Anacortes, WA
It must be a regional thing. I'm in Washington state and there aren't that many Philcos lurking about, at least not by comparison; perhaps our "remoteness" (every East Coaster knows there's nothing west of the Mississippi  ) we're more of a catalog-purchase territory. I quite honestly see more Airlines and Silvertones than anything else...
...but I admit that Philco runs in third place.
(This post was last modified: 11-19-2012, 09:53 AM by DeckApe.)
Posts: 181
Threads: 0
Joined: Mar 2008
City: Pocasset, MA
Shipping radios 3000 miles would certainly add to the cost.
Somewhere I've seen a map of the US from a New Yorker's viewpoint; there's essentially nothing west of the Hudson. Around here, Boston is known as the "hub" , short for "hub of the universe."
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Road Trip for a Philco 46-480
|
Good morning, folks! I’ve finished the cabinet and the electrical restoration, and have detailed those in their respecti...jrblasde — 10:56 AM |
Studebaker/Philco AC-2687 car radio
|
Arran,
Thanks for checking you manuals.
I appreciate that. Let me know what you find.
PhilPdouglaski — 08:46 AM |
Studebaker/Philco AC-2687 car radio
|
I have some car radio service manuals, Riders I think (not to be confused with the big blue binders), so I may see if on...Arran — 01:20 AM |
Philco model 40-100
|
Greetings;
Here is an update, I found a listing on fleabay for a similar chassis to yours, and it has a photo of what...Arran — 12:58 AM |
Philco model 40-100
|
Greetings;
I think I may have found a clue as to what is missing, from a search I made, there is a rear view of the c...Arran — 12:12 AM |
Philco model 40-100
|
I recently acquired a Philco model 40-100 farm (battery) radio. The radio was in very good condition except the red on f...mhamby — 05:59 PM |
Studebaker/Philco AC-2687 car radio
|
Hello, Richard
the radio is an AC-2687 Studebaker model. The Philco model is S -5323 and the chassis p/n is S-5523Pdouglaski — 11:52 AM |
48-482 rear panel help
|
The 48-482 is an AC only set as well, featuring a power transformer. While the transformer shouldn’t get “hot”, it is ye...jrblasde — 11:12 AM |
Studebaker/Philco AC-2687 car radio
|
I gave a Chrysler/MoPar car radio from 1954, it was made by Philco, and it uses two chassis, one has the power supply an...Arran — 11:06 AM |
48-482 rear panel help
|
Hello keithchip. You could make a hardboard back for the set, but make sure you provide plenty of ventilation holes in ...GarySP — 11:04 AM |
Who's Online
|
There are currently 2361 online users. [Complete List] » 2 Member(s) | 2359 Guest(s)
|
|
|

|