Can anyone identify this radio
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Craig's listing, calls it a Zenith but I didn't think they uses the shadow meter. Any idea of the make/model?
Jerry
http://flagstaff.craigslist.org/atq/3440717478.html
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yes, Zenith did use shadow meters in these early 30s sets.
The set in the pictures is a Zenith model 755.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
TA, your the man. Thanks again for expanding my knowledge. I figured they went with the good old eyetube.
Nice looking styling but then again, it is the "Z" manufacture.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 7,288
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Looks alot like a Philco 19!!!!
Terry
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Guess that's why I liked it Terry. Looks like I'm buying, need another console like a hole in the head. This is an addiction!
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 15,835
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Every hobby is an addiction, didn't you know?
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
I'm not a Z guy but I have a Z model 775 and it's actually a pretty good set. If I had a chance to buy another early 30s Z I probably would.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
TA, I'm thinking about it. You should be very careful admitting openly on the Phorum possession of a model Z. This could result in a demotion from Expert status to Noobie! Contrats on your 1200th post.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
The oldest radio in your humble host's collection is a brand Z Super VIII from 1924.
Philco didn't enter the radio manufacturing business until 1928.
--
Ron Ramirez
Ferdinand IN
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
+++ for you Ron, you do style flex! I guess TA is safe from demotion?
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
The early 30s Zs just appeal to me. They are fairly well laid out to work on, and the prices/availability of parts is better than those of the later 30s sets. The styling is fairly gothic, but again that appeals to me.
My 775 is a 12 tube set, BC only BUT the BC band is extended to 1750KHz. It has two speakers, variable sensitivity, and illuminated tone and volume control indicators.
Should you choose to acquire some of these era Zs, you should have a fair amount of success in doing so.
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Early brand Z radios from the late 20's and early 30's are near impossible to find around here. That said, the few I have run across seemed to be good radios.
No matter where you go, there you are.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
For anyone interested in the C/L listing, I visited the radio today. Cabinet needs a lot of glue, most joints are loose. All wood is there. Chassis looks untouched and the power transformer/field coil and voice coil all test good on resistance. Mike is open to offers, even chassis only. I don't think the cabinet would hold up well to shipping.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Man, I would like to BUT I'd better stick to what I am doing now.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Jay, there was a fellow up in Buffalo, NY, last summer who threatened to saw his LOVELY model 244 up after several unsuccessful tries to sell it!
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
New Philco Repair Bench
|
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM |
Made mistake & did not label connection
|
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires.
Why'n't you...morzh — 09:49 PM |
Made mistake & did not label connection
|
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM |
Made mistake & did not label connection
|
You'll have to forgive me, I am not sure what you mean. Can you explain what you are really saying. If anyone does not...georgetownjohn — 08:05 PM |
Made mistake & did not label connection
|
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM |
Made mistake & did not label connection
|
Maybe this is starting to make some sense in my hard head. Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM |
Made mistake & did not label connection
|
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM |
Made mistake & did not label connection
|
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM |
Made mistake & did not label connection
|
Hello John,
I have been there either label got lost or was not labeled !
Sincerely Richardradiorich — 02:15 PM |
Made mistake & did not label connection
|
Sorry, it is a Philco 37-640. Does that help?--Johngeorgetownjohn — 02:14 PM |
Who's Online
|
There are currently no members online. |
|
|