Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Jackson Bell Question
#1

i got this JB from a co worker the other day it is a nice 6 tube superhet with 3-57's,a 56,33 output and an 80 rectifier tube anyone have an idea of the chassis model number thanks Don


Attached Files Image(s)
   
#2

The 33 is wrong, it's an 2 volt output tube for a battery radio, very likely it was supposed to have a 47 or a 2A5. Somebody probably grabbed a random tube with the same base just to fill an empty socket, or wasn't aware that a 2 volt battery tube was very different from a 2.5 volt AC tube.
Regards
Arran
#3

yup i haven't measured any voltages yet BUT the set has been playing that way since who knows when it was in used daily until a few years ago and plays now with very little ,or no hum!! (i would have thought a 2.5 volt tube would have poped) or HUMM with twice the normal filiment voltage Don
#4

Nice JB, but yeah, the tube line-up sounds wonky with that 33 in there. It'd be nice to see some pictures of the chassis. It might be a more common chassis used in a less common cabinet.

The cabinet doesn't look familiar, but JB was a small west coast company and undocumented models turn up now and then. Looking at the cabinet style makes me think it may have been one of their later (last) sets made. JB is usually pretty good about having the model number stamped on the chassis or engraved on a chassis plate.

I just did a quick scan of Floyd Paul's JB documentation and didn't see a cabinet like yours.

And for anyone who doesn't have a set I highly recommend Los Angeles Radio Manufacturing, The First Twenty Years by Floyd A. Paul. It's a very interesting look at the birthplace of the midget/mantel set:

http://www.antiqueradios.org/paul-bks.html

These have recently been reprinted in a limited edition after being out-of-print and unavailable for years.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM
Made mistake & did not label connection
Maybe this is starting to make some sense in my hard head.  Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM
Made mistake & did not label connection
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM
Made mistake & did not label connection
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM
Made mistake & did not label connection
Hello John, I have been there either label got lost or was not labeled ! Sincerely Richardradiorich — 02:15 PM
Made mistake & did not label connection
Sorry, it is a Philco 37-640.  Does that help?--Johngeorgetownjohn — 02:14 PM

[-]
Who's Online
There are currently 4248 online users. [Complete List]
» 1 Member(s) | 4247 Guest(s)
Avatar

>