Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Jackson Bell Question
#1

i got this JB from a co worker the other day it is a nice 6 tube superhet with 3-57's,a 56,33 output and an 80 rectifier tube anyone have an idea of the chassis model number thanks Don


Attached Files Image(s)
   
#2

The 33 is wrong, it's an 2 volt output tube for a battery radio, very likely it was supposed to have a 47 or a 2A5. Somebody probably grabbed a random tube with the same base just to fill an empty socket, or wasn't aware that a 2 volt battery tube was very different from a 2.5 volt AC tube.
Regards
Arran
#3

yup i haven't measured any voltages yet BUT the set has been playing that way since who knows when it was in used daily until a few years ago and plays now with very little ,or no hum!! (i would have thought a 2.5 volt tube would have poped) or HUMM with twice the normal filiment voltage Don
#4

Nice JB, but yeah, the tube line-up sounds wonky with that 33 in there. It'd be nice to see some pictures of the chassis. It might be a more common chassis used in a less common cabinet.

The cabinet doesn't look familiar, but JB was a small west coast company and undocumented models turn up now and then. Looking at the cabinet style makes me think it may have been one of their later (last) sets made. JB is usually pretty good about having the model number stamped on the chassis or engraved on a chassis plate.

I just did a quick scan of Floyd Paul's JB documentation and didn't see a cabinet like yours.

And for anyone who doesn't have a set I highly recommend Los Angeles Radio Manufacturing, The First Twenty Years by Floyd A. Paul. It's a very interesting look at the birthplace of the midget/mantel set:

http://www.antiqueradios.org/paul-bks.html

These have recently been reprinted in a limited edition after being out-of-print and unavailable for years.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
38-10T chassis Restoration begins
Thanks for the info guys. I always wondered why the use of mica. Now I know.dconant — 01:52 PM
38-10T chassis Restoration begins
Most common plastics have a dielectric constant in the 3-4 range whereas mica is around 6. This means that even if you w...Steve D — 01:46 PM
38-10T chassis Restoration begins
It is acceptable but not desirable. Plastic is not an approved cap dielectric, and even though a reasonably thick piece...morzh — 11:52 AM
38-10T chassis Restoration begins
I have a question about the mica sheets. I thought I saw somewhere on the Phorum where someone used thin plastic report ...dconant — 10:44 AM
38-10T chassis Restoration begins
Yes, you should carefully remove the mica sheets from the trimmers otherwise you risk trapping foreign material in the t...RodB — 10:34 AM
American Bosch Model 802 auto radio
Hi Joe, Thank you again. The American Bosch Model 634A has the same tube lineup as my Model 802 and the parts layout dia...Antipodal — 03:09 AM
38-10T chassis Restoration begins
hello everyone, I know it has been a while since I have posted about this radio but finally got chance work on it . I ...radiorich — 02:45 AM
Rusty Tuning Condenser
You could soak the fins in vinegar. You have to be careful if any pot metal is involved because the vinegar will dissolv...RodB — 09:20 PM
Rusty Tuning Condenser
Hello, I have a Philco 91 where the tuning condenser fins are rusty. I magnet sticks to them so they can't be aluminium....dconant — 05:50 PM
American Bosch Model 802 auto radio
I’ve found six United Bosch auto radio’s with the same 6-tube line-up as the 802, on NostalgiaAir. They are models 150, ...Joe Rossi — 02:52 PM

[-]
Who's Online
There are currently 3543 online users. [Complete List]
» 4 Member(s) | 3539 Guest(s)
AvatarAvatarAvatarAvatar

>