Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Model 610
#1

I'm looking at a model 610 for less than $100. The cabinet looks good and it will have to be restored to get it to work.Does this sound like a good deal? What can you guys tell me about this set?

Thanks,
Eric


Attached Files Image(s)
   

Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org

#2

It's a five-tube, three band set. For what it is, it gets good reception on all bands with a good antenna.
#3

Thanks, TA I'm going to go for it.

Eric

Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org

#4

Offer them as little as possible for it, I wouldn't pay a full $100 for any five tube set needing refinishing and does not play, they were a good entry level AC set but like most 5 tube sets they are not hard to find.
Regards
Arran
#5

One thing this 610B has going for it is that it appears to have the original toning, or else someone refinished it and tried to get the original two-color toning right (hard to really tell from the thumbnail). I have seen so many 610B sets that have been stripped and refinished in a single color...it's nice to see a proper looking two-toned 610B for a change.

--
Ron Ramirez
Ferdinand IN
#6

The 610 is nice entry level set easy to work on and will give good performance. I like them! Price is a bit stiff.
Terry
#7

The price kept going up so I passed on it. Maybe the next one.

Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org

#8

What do you mean that the price kept going up? Was this a private sale you were working on or some auction? If you want a Philco tombstone set from around this period see if you can get a 620, 630, 640, or even a 650, or a 116. Generally speaking the average guy doesn't know the difference between a 5 tube set like a 610 and a 6, 7, 8, 9, 10 or 11 tube set so superior performance doesn't necessarily equal a superior price.
Regards
Arran
#9

It was on ebay. Thanks for the information. I now have a better idea of what to look for.

Eric

Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org





Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Hi Bridcarl +1 on the others.  Pin 6 of the 7C6 is the AVC Diode so it is appropriate that that pin 4 of the coil con...MrFixr55 — 07:30 AM
462ron
Joseph, this is beyond awesome. A lot of thought and engineering went into this and you hit a home run! Now I must save ...462ron — 07:27 AM
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM

[-]
Who's Online
There are currently no members online.

>