1948 Philco Transitone model 48-250
Posts: 1,531
Threads: 242
Joined: Sep 2012
City: West Bend, Wisconsin
Completed restoration last month... and I will freely admit it's not totally authentic...
I cheated a little bit. I know, shame on me... the red cabinet wasn't available until the following year, with the 1949 models. But I didn't care for the all white color scheme. Before I restored it, this was obviously a radio that was kept on the kitchen counter top, judging by the 50 years of dried food droppings schlobbered all over the cabinet. It needed to be repainted, so I opted for red instead of white. Personally, I think it's an improvement over white, so my apologies to the purists who know these Transitones only came in all white or the molded dark brown marble look in '48  .
Greg V.
West Bend, WI
Member WARCI.org
Posts: 157
Threads: 7
Joined: Feb 2013
City: Osceola, IN
I don't think you should ever have to apologize for making your radio what you want. If a purist buys it from you and wants to return it to the original color, that's their prerogative. I like the red look myself!
Posts: 4,864
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
It's a very common model anyhow so no harm done. Now if you had painted a Philco 201X or a 509X red some here might be upset.
Regards
Arran
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Um, according to my records, that model was only available in brown and ivory in 1949 as well - not red.
--
Ron Ramirez
Ferdinand IN
Posts: 1,531
Threads: 242
Joined: Sep 2012
City: West Bend, Wisconsin
I'll be darned... I just saw a red 1949 on eBay that appeared to have the original finish. The decal was appropriately worn, and the label was mostly intact underneath... where there was a chip in the label, red shown through, indicating the label was put on after it was painted, and apparentely not masked over.
http://www.ebay.com/itm/Philco-Transiton...7675.l2557#
Greg V.
West Bend, WI
Member WARCI.org
Posts: 4,864
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
The usual sources of antique radio supplies have been selling Philco Transitone decals for years. So the ability to repaint one of these in any colour, and add an original style decal afterword, isn't exactly a new phenomenon. I used to repaint Bakelite cabinets in assorted colours, but I usually tried to find ones that were more subdued and in keeping with the period of the set. Now if I repaint a Bakelite I usually respray them in an off white or pure white colour.
Regards
Arran
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
From the ad:
Quote:The radio has many coats professionally applied red lacquer, hand rubbed to a smooth shine.
Red paint usually = $$$ in the eBay alternate universe.
Why? I don't know.
But anyway...either the seller did an amazing job of masking off the sticker on the underside, or managed to remove it before painting, and glued it back on afterwards.
The "Philco Transitone" decal is obviously new.
--
Ron Ramirez
Ferdinand IN
Posts: 1,531
Threads: 242
Joined: Sep 2012
City: West Bend, Wisconsin
Maybe it was just the bad lighting on the photo that made the decal in front look darker than it should. The sticker on the bottom was what threw me. Don't know how he salvaged it. I tried removing mine, but it was far too brittle. Then I tried masking it off, but doing so would only damage it from the tape. So I finally wound up scanning the label and printing out a new one, which was reglued onto the bottom after painting. I scraped the old one off and sanded it smooth prior. Despite it not being an authentic color, I still like red better than white And, as Arran pointed out, it's a common set. Far from rare, so one painted not to factory specs isn't the end of the world. I was actually restoring this for a friend, who wanted one of those colorful bakelite sets as his first venture into the wonderful world of antique radios. But after I finished it, I liked it so much that I decided to keep it for myself! I restored and gave him one in the original marble finish cabinet instead.
Greg V.
West Bend, WI
Member WARCI.org
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
All my dud tubes are drying a fresh coat of red paint as I type this.
Gonna make a bundle selling 'em on eBay!
 
Posts: 1,409
Threads: 72
Joined: Oct 2007
City: Linn Creek, MO
Quote:All my dud tubes are drying a fresh coat of red paint as I type this.
Gonna make a bundle selling 'em on eBay!
Oh no, Tom, you want to paint your tubes blue 
Steve
M R Radios C M Tubes
Posts: 1,531
Threads: 242
Joined: Sep 2012
City: West Bend, Wisconsin
Haha! Well this guy with the red 1949 on eBay got it bid up to $130, but it still didn't meet his reserve price!
Greg V.
West Bend, WI
Member WARCI.org
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Greg, the only thing I would change with your set is to paint the knobs to match the cabinet. It looks good and will add color.
My friend Henry Harmony, a Great American, collects "plastic sets." Over the years I have tried to pick up red or orange sets for him for that reason! Most of them were either brown or white!!
Posts: 5,163
Threads: 273
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Here's a red 46-200 by the same seller. This time he has two bids by the same person to get the price up to $160 
http://www.ebay.com/itm/Philco-Transiton...4170f30541
Posts: 1,531
Threads: 242
Joined: Sep 2012
City: West Bend, Wisconsin
Hmm, Do I smell a shill?
Greg V.
West Bend, WI
Member WARCI.org
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
SHILL !!! SHILL !!! SHILL !!!!! 
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Refinishing Ideas
|
| Hi Poulsbobl,
I think that you could get away with it. In the Philco Library, there is a parts listand specs for sp...MrFixr55 — 11:54 PM |
|
Philco 46-480 Electronic Restoration
|
| The sleeving for the transformer arrived early, so I went ahead and finished reassembling. The chassis looks far better ...jrblasde — 10:15 PM |
|
Philco 610B oscillator wiring
|
| I don't know what you are referring to when you say "tube cathode ground". Ground is a connection to the chass...RodB — 05:56 PM |
|
Zenith H725
|
| Good points, Arran. I haven't encountered this problem with any other radio (all earlier vintages), so am learning here....EdHolland — 05:32 PM |
|
Zenith H725
|
| Ed;
One thing that I will say about these is that Brand Z was considerate enough to make these mica caps easily acces...Arran — 02:34 PM |
|
Philco 610B oscillator wiring
|
| Do you know what run # your chassis is?
It took me a while to find what you were basing updates/modification on as I did...Radioroslyn — 07:34 AM |
|
Need to purchase some accessories for restoration of my Old Philco Radio
|
| COLLEAGUES,
Thank you all for such good and important suggestions as how to find good replacement parts. I will go fo...palonso — 07:05 AM |
|
Zenith H725
|
| Here's what the inside of AM IFT2 looked like, and the other pic shows the discs I made to take place of the mica and ke...EdHolland — 07:40 PM |
|
Zenith H725
|
| IF2 will need replacement caps. The arcing was severe enough that the mica is pitted and holed where the HT flashed over...EdHolland — 04:04 PM |
|
My Philco 37-116 Restore
|
| Measuring from center tap like the tube voltages show. Cap 127 is isolated from ground. Cap 127 shown in upper left of p...dconant — 08:05 AM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
