Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1948 Philco Transitone model 48-250
#1

Completed restoration last month... and I will freely admit it's not totally authentic...

I cheated a little bit. I know, shame on me... the red cabinet wasn't available until the following year, with the 1949 models. But I didn't care for the all white color scheme. Before I restored it, this was obviously a radio that was kept on the kitchen counter top, judging by the 50 years of dried food droppings schlobbered all over the cabinet. It needed to be repainted, so I opted for red instead of white. Personally, I think it's an improvement over white, so my apologies to the purists who know these Transitones only came in all white or the molded dark brown marble look in '48 Icon_smile.

   

Greg V.
West Bend, WI
Member WARCI.org
#2

I don't think you should ever have to apologize for making your radio what you want. If a purist buys it from you and wants to return it to the original color, that's their prerogative. I like the red look myself!
#3

It's a very common model anyhow so no harm done. Now if you had painted a Philco 201X or a 509X red some here might be upset.
Regards
Arran
#4

Um, according to my records, that model was only available in brown and ivory in 1949 as well - not red.

--
Ron Ramirez
Ferdinand IN
#5

I'll be darned... I just saw a red 1949 on eBay that appeared to have the original finish. The decal was appropriately worn, and the label was mostly intact underneath... where there was a chip in the label, red shown through, indicating the label was put on after it was painted, and apparentely not masked over.

http://www.ebay.com/itm/Philco-Transiton...7675.l2557#

Greg V.
West Bend, WI
Member WARCI.org
#6

The usual sources of antique radio supplies have been selling Philco Transitone decals for years. So the ability to repaint one of these in any colour, and add an original style decal afterword, isn't exactly a new phenomenon. I used to repaint Bakelite cabinets in assorted colours, but I usually tried to find ones that were more subdued and in keeping with the period of the set. Now if I repaint a Bakelite I usually respray them in an off white or pure white colour.
Regards
Arran
#7

From the ad:

Quote:The radio has many coats professionally applied red lacquer, hand rubbed to a smooth shine.

Red paint usually = $$$ in the eBay alternate universe.

Why? I don't know.

But anyway...either the seller did an amazing job of masking off the sticker on the underside, or managed to remove it before painting, and glued it back on afterwards.

The "Philco Transitone" decal is obviously new.

--
Ron Ramirez
Ferdinand IN
#8

Maybe it was just the bad lighting on the photo that made the decal in front look darker than it should. The sticker on the bottom was what threw me. Don't know how he salvaged it. I tried removing mine, but it was far too brittle. Then I tried masking it off, but doing so would only damage it from the tape. So I finally wound up scanning the label and printing out a new one, which was reglued onto the bottom after painting. I scraped the old one off and sanded it smooth prior. Despite it not being an authentic color, I still like red better than white Icon_smile And, as Arran pointed out, it's a common set. Far from rare, so one painted not to factory specs isn't the end of the world. I was actually restoring this for a friend, who wanted one of those colorful bakelite sets as his first venture into the wonderful world of antique radios. But after I finished it, I liked it so much that I decided to keep it for myself! I restored and gave him one in the original marble finish cabinet instead.

Greg V.
West Bend, WI
Member WARCI.org
#9

All my dud tubes are drying a fresh coat of red paint as I type this.

Gonna make a bundle selling 'em on eBay!

Icon_wink Icon_thumbup
#10

Quote:All my dud tubes are drying a fresh coat of red paint as I type this.

Gonna make a bundle selling 'em on eBay!


Oh no, Tom, you want to paint your tubes blueIcon_lol

Steve

M R Radios   C M Tubes
#11

Haha! Well this guy with the red 1949 on eBay got it bid up to $130, but it still didn't meet his reserve price!

Greg V.
West Bend, WI
Member WARCI.org
#12

Greg, the only thing I would change with your set is to paint the knobs to match the cabinet. It looks good and will add color.

My friend Henry Harmony, a Great American, collects "plastic sets." Over the years I have tried to pick up red or orange sets for him for that reason! Most of them were either brown or white!!
#13

Here's a red 46-200 by the same seller. This time he has two bids by the same person to get the price up to $160 Icon_eek
http://www.ebay.com/itm/Philco-Transiton...4170f30541
#14

Hmm, Do I smell a shill? Icon_lol

Greg V.
West Bend, WI
Member WARCI.org
#15

SHILL !!! SHILL !!! SHILL !!!!! Icon_e_surprised




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 96 cabinet veneer
There is some description of the veneers in the 1930 Brochure in our library. Here's the link: klondike98 — 11:59 PM
Philco 91 Speaker Replacement
I can't remember, but there was a particular product for loosening glue on the more modern "spiders", used pos...MrFixr55 — 09:43 PM
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM

[-]
Who's Online
There are currently no members online.

>