The Philco Radio Story on Video
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
This video, featuring a silent film from 1929 shot in the Philco factory at Ontario and C Streets in Philadelphia was available for several years on VHS tape. I think that it was on DVD at least briefly. It appears the company which produced the video, Encore Home Entertainment, has gone out of business as I can no longer find a website for them. Encore is still around and still selling the video - see post #14 below.
Anyway, Codefox brought it to my attention that the video is now available on YouTube. The resolution is not great, but viewable.
You can watch it here, or click the YouTube logo in this thumbnail to watch it on the YouTube site:
[Video: https://www.youtube.com/watch?v=kanPsUDyKrU]
--
Ron Ramirez
Ferdinand IN
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Hmm, another reason for me to hope we will be finally able to get DSL next week! 
No matter where you go, there you are.
Posts: 403
Threads: 40
Joined: Feb 2011
City: McPherson, KS
Posts: 7,285
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
So Ron, Is that a model 87 they're putting together??? Didn't see any holes for the grid leads in the coil shields.
Terry
Posts: 4,705
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I think there may be a similar silent film showing a tour of the old Rogers-Majestic plant in Toronto, but I have never seen any more of it then some footage of the outside of the plant and Ted Rogers in his office. I've heard of the Philco factory tour, and have seen ones put out by RCA, I think there may also be one of the Atwater Kent plant in Philadelphia as well.
Regards
Arran
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Hi Ron
That was really interesting, thanks for posting I really enjoyed it 
Joe
Joe Bratcher near Louisville, KY
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Interesting video! I don't have an 87, but I have (I know I said I wasn't buying anymore  ) model 65 in that cabinet. Hey, it was only $20, so how could I turn it down?
Gene
(This post was last modified: 03-10-2013, 10:13 AM by Gene Pederson.)
Posts: 7,285
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
I've got an 87 and a 95 with that cabinet too.
Terry
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Nice video and I'm looking for a 95 highboy. Seem either hard to find or very expensive.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Neat!
Posts: 40
Threads: 5
Joined: Apr 2008
Ron, Loved the video. Much better than expected. Thanks again.
Dave D
Posts: 1,402
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
How things have changed, OSHA would have a hayday in that factory! The total lack of machine guarding and the guy spraying lacquer with no respirator.
Steve
M R Radios C M Tubes
Posts: 52
Threads: 1
Joined: Mar 2013
City: Minneapolis, MN
Thanks. It impresses everybody.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Hold the phone, folks. Encore Home Video is still around and still selling the PHILCO video on DVD:
http://encorehomevideo.com/radio/philco.html
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
trying to identify this wire type
|
| ...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM |
|
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
|
| I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM |
|
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
|
| Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM |
|
trying to identify this wire type
|
| The red wire is rubber covered wire.
The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM |
|
trying to identify this wire type
|
| Greetings Phorum members,
Hope you can help me identify this type of wire in the photo I have attached. I am not sure ...georgetownjohn — 01:53 PM |
|
Philco 60 Squealing
|
| All correct shields must be in place, all tubes correct no subs of any kind.
Check any soldered, riveted ground conne...Chas — 01:24 PM |
|
Philco 60 Squealing
|
| I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM |
|
Philco 46-420 Code 121 Reception issues
|
| Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
|
Philco 46-420 Code 121 Reception issues
|
| You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
|
Philco 42-1008 conversion kit
|
| Interesting. I haven't seen that before.klondike98 — 07:02 PM |
|
Who's Online
|
There are currently 3162 online users. [Complete List]
» 1 Member(s) | 3161 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
