Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Atwater Kent mod.75
#1

I have a chance to buy an A.T. mod 75. In good condition. But I"am sure it will need some cap. replacement. Does anyone know if these sets have the rubber wires that I hear get very brittle and hard to work with? Thanks PS. They want 75.00 for this set. Seems like a good price. It is a console.
#2

Is that the lowboy floor type? Seems nice.

Also AK were known for their quality. Don't know about rubber-coated wires, but I'd get it anyway for 75 bucks. Price matches the model. Icon_smile
#3

Hi MORZH, Its a lowboy floor type. I have trouble linking on here. But it is just like pic on radio museum site.
#4

I'd say if it is in good shape, $75 is a steal for a nice AK set. Go for it! Icon_smile

No matter where you go, there you are.
#5

I just got back with the AK. Cabinette in real good shape. Will require some work on chassis. I will try to post pic of it soon.
#6

If I looked up the right model, it is a radio-phono set. Either way, I think you made a good choice! Icon_smile

No matter where you go, there you are.
#7

I do feel good about the buy jayce. You are correct, radio-phono set.
#8

Now the fun begins. Any atwater kent owners out there that might know where to get the schematic for mod. 75? I checked nostalgia air. There is only 2 pages about phono pick-up. Is maybe one of the other mod. the same schematic I.E. the 74 ? Thanks for any help. Mike
#9

Mike

Try here:

http://www.atwaterkent.info/TechData/akS...Index.html

--
Ron Ramirez
Ferdinand IN
#10

Thanks Ron, that's what I needed. Mike
#11

Trying to figure out photo bucket to show pic. of the A.K. I have the instructions from this forum but I'am not seeing any IMG code or box as in instruction.I have the pic uploaded ,just going to try to get it to this post. So if something goofy appears or nothing you know why. LOL


http://s1336.photobucket.com/user/220koh...r/220kohms
#12

Well that failed will try again later. Gave me a headache!
#13

[Image: http://i1336.photobucket.com/albums/o654...971853.jpg]
I hope this works.
#14

The finish looks a little tired and bleached out compared to the highboy console sitting next to it, but at least it is all there and hasn't sat in a damp basement.
Regards
Arran
#15

hello Friends of overseas

There is one Atwater 75 model , seems in good repair , available not far from my house , interesting price .
I ' ll phone the vendor to morow and  l' ll  try to get it ....

I hope to come back with good news to morrow or within few days

kind regards

Claude from France




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM

[-]
Who's Online
There are currently 3975 online users. [Complete List]
» 3 Member(s) | 3972 Guest(s)
AvatarAvatarAvatar

>