Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

The old 38-1 grille cloth
#16

@Arran,

I used brake cleaner. I obviously don't know what caused it but it's not dirt. I vacuumed tenderly before I started and got out a little dust. As long as it's been in the fabric, I don't think there is any way to remove it now. There was more fraying than I originally thought so aggression is not appropriate now.

The pattern of the stain hints that something burst or exploded near the top and some kind of fluid ran down to the bottom. The residue is very thick there. The grille bars show some evidence that whatever it was affected them slightly.

I'm off to find some copper-toned spray paint.

Art
#17

Here it is almost mid-April. I'm wanting warm weather to start on cabinet and we got freezing rain and cold last night. Look out cabinet when warm weather gets here!!!Icon_lol




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit.  That would rem...alangard — 09:30 PM

[-]
Who's Online
There are currently 7554 online users. [Complete List]
» 1 Member(s) | 7553 Guest(s)
Avatar

>