Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Unidentified Philco Radio/Record Player
#1

Recently purchased two radio/record players from a flea market one of which says Philco on the front and has a tag inside that says the radio is a philco model 740.

I've been unable to find any information on this radio and was hoping that someone here might be able to help me out.

Here's a picture of the radio in question: [Image: http://s7.postimg.org/c99ah2qd3/Philco_pic.jpg]

Any help would be greatly appreciated.

Thank you
#2

I'd take a guess and say that it is from the late 1940's to the early 1950's. Like 1948-51.
Terry
#3

You probably can't find anything because a Model 740 is a Canadian model number. Your best bet for finding that would be to find someone with a set of Radio College of Canada manuals if you want a schematic, though there maybe someone out there who has the Canadian Philco factory service data. It is from between 1948 and maybe 1952 by the looks of things, that being said radio phono consoles from that era don't tend to have much collectable appeal, if that was something you wanted to know.
Regards
Arran
#4

Hi Machinefaction,

I took a stab at searching through the Radiomuseum.org website and found what looks like your model:
http://www.radiomuseum.org/r/philco_49_1600.html

There's no photo shown, just a factory drawing. But it has most of the characteristics of your case and grille cloth placement.
A similar model (with a different case) from the same year shows a pretty accurate match to your knobs and dial glass:
http://www.radiomuseum.org/r/philco_49_1605.html

I would bet yours is a Philco 49-1600. But I'm sure there are older (and wiser) folk here on the forum who can confirm this!

Hope that helps!

Michael (mbhdesign)

mbhdesign
Michael Hennessey




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Radio city products 664 schematic request
Need a schematic or manual for the 664. The 663 may be similar.daveone23 — 12:38 PM
New Philco Repair Bench
Thanks Gary.dconant — 12:16 PM
New Philco Repair Bench
I tried accessing the site through our library and got the same response. It's reported to our tech gurus. GaryGarySP — 11:50 AM
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM
Made mistake & did not label connection
Maybe this is starting to make some sense in my hard head.  Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM
Made mistake & did not label connection
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM

[-]
Who's Online
There are currently 3932 online users. [Complete List]
» 1 Member(s) | 3931 Guest(s)
Avatar

>