Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

66B Tombstone
#1

Bought one of this off ebay for $20 but the cabinet is in pieces. (Some of it happened due to the person shipping it improperly even though I specified how to pack up the radio Icon_mad Was told the radio does worked but have not recapped it. What is the chance of finding a decent cabinet for this model or repairing the cabinet. The damage is extensive in my mind. Would any one be willing to restore the cabinet for me? I think I can do the electronics but have never done cabinet repair.

thanks
Chris
#2

Hi Chris

Ah, the clueless ebay sellers that do not give a D**n about anything except collecting the $$$. Frustrating, isn't it? Especially when you suggest to them how to pack, even offer extra $$ for extra packaging...and they ignore you anyway and just throw it in a box with minimal (or sometimes NO) packing material. Icon_evil Far too many eBay sellers fall into this category, unfortunately. Of course, I think just ONE incident like this is too many. One man's opinion. That's all.

Never believe anyone who says the radio "works" unless you know the seller personally, or by reputation, to be an honest person. I have found that in the world of most eBayers, "working" means "the tubes light up and the dial lamp lights up and it may or may not smoke but I won't tell you that part."

How about some photos? Would you be willing to divulge the eBay item number so we can all see what you bought? This will help in determining if the cabinet is salvageable.

--
Ron Ramirez
Ferdinand IN
#3

Ron,
Here is the link. I was able to get a partial refund of $10 on the item but the cabinet is a mess. You can see some of the damage but the cabinet is coming apart. Were these sets nailed together or glued. The veneer is curling in some areas. Will try and take some pictures. How do I post pictures on the forum?
http://cgi.ebay.com/110199275067

Thanks
Chris
#4

Ah, a 60MB. Neat, I always felt that cabinet design was definitely European-influenced. You did very well on that, even if the cabinet does need major work. Someone recently sold just the chassis to a 60 for around $56 or so Icon_exclaim which I feel is WAY out of line for just a non-working 60 chassis. Somebody wanted that one pretty badly. But I digress...

Veneer was glued to the substrate; some trim pieces were nailed on with very small nails or glued on, depending on the radio.

Instructions for posting photos on the Phorum may be found here:
http://philcoradio.com/phorum/showthread.php?tid=29
http://philcoradio.com/phorum/showthread.php?tid=4371

--
Ron Ramirez
Ferdinand IN
#5

Cabinet looks repairable to me. Lotsa nicks but re-stregthening the joints does not look insurmountable from the ebay pics. I have a 66MB too with an un-restored chassis on the back-back-back burner. Unique design.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Restore Code ??
Can someone tell me if my 42 tubes are connected triode or pentode in fixed or cathode bias? How could I tell by looking...dconant — 10:47 AM
Philco 40-120C Restoration
Hello David, that is great news about the tubes source being local ! Sounds like you got good start on the radio . ...radiorich — 09:41 AM
An attempt to remove the Field Coil from a G speaker
Mike; I've only run into a speaker with an open filed coil twice, and they were on newer speakers from the 1940s. One ...Arran — 12:48 AM
An attempt to remove the Field Coil from a G speaker
Arran Yes, this is my plan for now and what do I got to lose, this is not even the speaker from this radio, but one o...morzh — 10:44 PM
An attempt to remove the Field Coil from a G speaker
Mike;  I would unwrap the field coil, and see if maybe there a break near one of the ends, like where the coil wire att...Arran — 10:23 PM
An attempt to remove the Field Coil from a G speaker
...and this is what I did. I fed a little LT into the screwholes with a small brush, and a little on the rim next to the...morzh — 09:52 PM
Philco 40-120C Restoration
I combined the two 40-120C threads together as we like to keep the discussion of the same radio together. It helps with...klondike98 — 09:36 PM
Philco 40-120C Weak, Distorted Ouput
Just checked were I buy tubes price is four dollars. So living in Florid we have a local source for tubes. David    David — 09:14 PM
Philco 40-120C Weak, Distorted Ouput
The higher voltage may be due to higher mains voltage. My mains run 120-125AC when the set was new mains would be 110-11...David — 09:09 PM
Philco 40-120C Weak, Distorted Ouput
Thank you for your reply. I pulled a speaker from a Philco 41-221 and received the same result. I used a signal tracer t...bluecap — 08:45 PM

[-]
Who's Online
There are currently 5425 online users. [Complete List]
» 1 Member(s) | 5424 Guest(s)
Avatar

>