Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 37-630 nameplate
#1

Who out there sells the PHILCO waterslide name for my cabinet?
#2

Radio Daze.

http://www.radiodaze.com/product/6048.aspx

--
Ron Ramirez
Ferdinand IN
#3

OK thanks Ron here is a question you might be able to answer there is a paper tag still on the inside of the cabinet ===part no.102561====final insp. no. 122031 and run no. which I cant make out. What do the numbers mean? I bought the radio up in Frankenmuth Michigan at a antique shop for $20 dollars. Thanks again Ron.
#4

Here are some pictures of my 37-630


Attached Files Image(s)
           
#5

The cabinet part no. is 10256A. Originally used for models 37-640MX and 37-641MX. Philco eliminated the 37-640 from its lineup at mid-season (January 1937), and began to offer the 37-630 in this cabinet. "Final Inspection" is probably the number of the particular inspector who inspected that cabinet. "Run No." is the run number of the set, as these were produced in groups or runs.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
I am late to this post, amazing amount of work for a speaker Mike. You must like the challenge. I have a speaker from an...Paul Philco322 — 01:04 PM
An attempt to remove the Field Coil from a G speaker
Mike, give this site a look for your spider. Can't hurt. Take care and BE HEALTHY! -GaryGarySP — 12:41 PM
An attempt to remove the Field Coil from a G speaker
Rod, Bubble packaging? The one I know (if you mean the large bubble type) is really thin. I have some at home. Is there...morzh — 12:23 PM
An attempt to remove the Field Coil from a G speaker
Q8. What's the meaning of life? I have read that someone made a spider out of the clear plastic from bubble packagin...RodB — 11:07 AM
An attempt to remove the Field Coil from a G speaker
So, Q1. Does anyone know where to get the spider. Q2. If there is no such place, what material is best? I doubt tin is...morzh — 09:43 PM
An attempt to remove the Field Coil from a G speaker
Arran The oxidation seems to go deep, a few layers. The break starts right there, but then it will occur on every la...morzh — 07:35 PM
An attempt to remove the Field Coil from a G speaker
Mike, This is just a thought, the are on the coil where the verdigris (green oxidation is) I wonder if that is where ...Arran — 06:32 PM
An attempt to remove the Field Coil from a G speaker
Mike; I've made a one or two spiders by using some card stock, and a razor blade, it took more then one try but they ...Arran — 05:48 PM
Philco 91 Restore Code ??
I wondered about that. Wish there was some place local to get this stuff.dconant — 04:20 PM
Philco 89 indicator light.
Bending the lamp bracket (moving the lamp, that is) can possibly change the shape of the pointer a bit, but not its loca...morzh — 04:01 PM

[-]
Who's Online
There are currently 4609 online users. [Complete List]
» 2 Member(s) | 4607 Guest(s)
AvatarAvatar

>