Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

My Kutztown Score
#1

This one didn't just talk to me, it SCREAMED! Certainly an odd duck, the badge reads "The Cunningham Radio Co." Uncertain if this beauty was perhaps related to the tube company or the Detroit drugstore chain. Haven't pulled the chassis yet, but its a four tuber + ballast. With a gorgeous dial like that, it was hard to say no. Any clue as to the actual manufacturer?


Attached Files Image(s)
   

Mike Koste
Gobs of Knobs
Zucksville, PA
#2

Mike,

So the knob guy - it was you?
#3

RCA was connected to Cunnigham, perhaps a RCA manufactured set, at first glance I would guess maybe Detrola as they did a lot of private label
stuff. any model#? Info on chassis? Pics?

Paul

Tubetalk1
#4

I'll get out my magnifying glass and compare the Cunningham logo on the radio to a Cunningham tube logo. At quick glance, they look similar, but not sure they're exact. Pulled the chassis this AM and found that, according to the printed sockets, the 6C6 and 6D6 were in the wrong sockets. The radio also has a 25Z5 rectifier, 43 output tube, and a "Type A" air cooled ballast, which I believe is a replacement. Sadly, several hundred different sets had this tube line-up which will make identifying the actual manufacturer all the more difficult. One friend thought that it may be a rebadged Trav-Ler.
Once the tubes were installed in their proper places, I brought it up on the variac and eventually got pretty good reception despite excessive hum. For now, it will be a handsome shelf sitter until I get around to recapping it.

PS: Yes, morzh. I AM the knob guy.

Mike Koste
Gobs of Knobs
Zucksville, PA
#5

I can attest to Mike being "The Knob Guy". Hooked me up with original knobs for my Model 20 when I met up with him at Kutztown. You need knobs? He's got them!! Take care. Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
#6

Mike

I was the guy in the T-shirt "Beer, not for breakfast anymore" and I was together with Terry, he bought some knobs off of you, the tall guy in overalls.
I said that that woman, Julie (I think) sent me to you.
#7

I seem to recall seeing that shirt.

Mike Koste
Gobs of Knobs
Zucksville, PA
#8

Very nice score Mike!

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#9

Yeah, me likes it! Looks cool!
#10

From first glance and given the tube lineup my guess would be that it's a product of the infamous "Plant A" in Chicago. They were notorious for producing dozens of cheap AC/DC models with TRF circuits a fancy multi coloured dial, and a meaningless nameplate tacked on the front.
One thing I can see is that the cabinet was refinished in a matte clear coat, something people still persist in doing even though these were all finished in gloss lacquer originally.
Regards
Arran
#11

Further research provided a positive ID. The Cunningham is actually a Climax model C, vintage 1937. There is a picture of the Climax version in the first edition of Stein's Machine Age to Jet Age.

Mike Koste
Gobs of Knobs
Zucksville, PA
#12

I would have bought it too.

Check out the similarity of the cabinet design with this Kadette. The big dial is much more impressive, but it makes me wonder if they were not produced by the same people.

   
#13

No they were not produced by the same people, Kadette's were produced by the International Radio Corporation of Ann Arbor, Michigan. Most of the independents, as well as some of the major manufacturers, purchased cabinets from outside suppliers who specialized in making radio cabinets, so you can't really judge whether something is a company X radio based on it's cabinet alone.
Regards
Arran
#14

Yes, that is what I meant, the cabinets.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
trying to identify this wire type
Thanks to all for the feedback. As Arran said, it is probably an older replacement and yes it has a grid cap so I will ...georgetownjohn — 09:32 PM
trying to identify this wire type
It's possible that the red wire, actually a grid cap lead, is a very old replacement, I can't remember seeing a pre 1939...Arran — 09:18 PM
Gilfillan Brothers Car Radio?
Hi everyone,  Special thanks to Joe Rossi for tracking down this obscure radio and thanks to others who took up the hun...Antipodal — 08:15 PM
trying to identify this wire type
Here's one source for your wire of many. Take care and BE HEALTHY! Gary P.S. Can't get the right color you need? I ...GarySP — 06:40 PM
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM

[-]
Who's Online
There are currently 5213 online users. [Complete List]
» 1 Member(s) | 5212 Guest(s)
Avatar

>