Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
http://s1194.photobucket.com/user/TAForb...son%20180L
Found in VA. Decent condition, but clear coat gone in a couple of places.
This is a seventeen tube set, PP 6L6s diven by two 6F6s. (one 6F6 is bass-boost amp, it's plate is connected to the driver 6F6 plate.
All controls appear to function properly. This is a nice "encore" after recently finding a 12S471 locally.
Here is a better of the whole front of the set. FYI the doors are open to display the conrtol panel.
http://i1194.photobucket.com/albums/aa37...80L005.jpg
(This post was last modified: 05-04-2013, 02:59 PM by TA Forbes.)
Posts: 4,891
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
What a beast! You know Stromberg Carlsons are like RCA and Sparton sets, they are often overlooked, which is good because it keeps them affordable.
Regards
Arran
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yes, thanks, it is that!
Funny thing, the Strombergs seem to have a cult following. Those who love them have reacted like you, those who don't are unimpressed.
Judging by the circuitry I would have to agree that it is similar to the RCA line in that they used a four-gang tuning cap and LOTS of caps/coils/xfrmrs to maximize the reception/selection. I also like the additional AVC and bass circuitry that is above what is normally seen.
A friend of mine who is into them and actively seeks them out stated that he has never seen another one and believes that they are a low-production model. But again, I have no info on that.
I have only had a couple of them in the last 40+ years and the ones I had I sold or traded soon after I got them. But this one I may end up keeping. I'm a sucker for lots of tubes/bands/bass boost/watts output.
I believe that this was their top-end set for 1936-37, but info about them is sparse at best.
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
Very impressive looking set! Stromberg-Carlsons are definitly not common around my area at least.
No matter where you go, there you are.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Nothing is common around here.
That must be a loud radio.
249
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yes, thanks, agree that it should be a loud one.
The 6F6 drivers had 405V plate voltage on the 6L6 tubes leads me to believe that it is an AB1 or AB2 amplifier. If so, the potential output ranges from ~ 20 to 40 watts. 
Oh yes, it also has an ST-shaped 6E5 eye tube.
Posts: 6
Threads: 2
Joined: Apr 2010
It was just my birthday (hint hint) it's never to late for a great present you the man!!!!!!
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Posts: 4,440
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
That dial is a beaut. Stromberg Carlson was out of Rochester NY. Made Telephone equipment and did a lot of that for the Government. Their build quality is very good. I have a couple of consoles, I have a little 6 tube job from the 40's they made, it weighs 3x most sets it size and is a great little performer.
I would take it, where did you put these monsters?
Paul
Tubetalk1
Posts: 5
Threads: 2
Joined: May 2013
City: Santa Fe, NM
Indeed. Stromberg-Carlson does have a cult following--though how many people constitute a cult is open. I have a Model 1121, Series 14 that I've had since I was fourteen (almost fifty years). Does anyone know where I can get an accurate schematic for this. There are plenty of schematics for Series 10,11,12, but Series 14 seems to be a rare bird.
Thanks.
MD
Posts: 462
Threads: 40
Joined: Jun 2010
City: Lehighton
State, Province, Country: PA
Beautiful S-C! I have a 535M and I agree, they are very well made.
Larry
Posts: 16,505
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I've been wantin' a S-C for the longest time.....
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Must be my time for Stromberg sets. Just located a 935M up home in NY and am going to take a look when I go there next month.
Posts: 16,505
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I wanted their ""strato-world"", was it? Their "transoceanic" version. Let couple go, then could not find anything decent below 300 bucks.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Oh yes, the Strombeg "T.O." is tough to find and usually expensive when you do find one.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Testing a speaker and output transformer Trutone A2-G
|
| Would an output transformer if weak, cause the problems I am seeing with lower B+ voltage?
murfmurf — 01:22 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| Hello murf! I merged the threads. Please do not start new threads regarding the same radio. Take care, - GaryGarySP — 10:21 PM |
|
Philco 42-345 Restoration/Repair
|
| Regarding picture 5 on page 1 of this thread this capacitor is #40 on scematics diagram - 4mF+4mF. Black wire is "-...Vlad95 — 09:01 PM |
|
Philco 42-345 Restoration/Repair
|
| That's a dual 4 MFD, red and green are both 4mfd and black is common negative. You should be able to see them in the pow...RodB — 08:58 PM |
|
Philco 42-345 Restoration/Repair
|
| Can anyone help me figure out a capacitor that has 3 wires coming out of it red and green on one side and a black wire o...osanders0311 — 08:14 PM |
|
Two small radios from France. Restoration and review.
|
| Greetings;
I think that it's possible that the assortment of components was the result of post war parts shortages, a...Arran — 12:18 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Unfortunately I can't inject any audio into the volume control. It is in the primary circuit of the antenna coil, not in...Stormlord5500 — 09:32 AM |
|
Philco model 38 code 121 not receiving signal.
|
| Sounds good Gary I'll do that. I have plenty of stuff like that I can scrounge up. I am still kind of new to all this so...Stormlord5500 — 08:47 AM |
|
Philco Battery-WWII vintage
|
| Seems to me that this a general purpose or radio filament 6V battery of very high amp-hour capacity and very high "...MrFixr55 — 08:08 AM |
|
Philco model 38 code 121 not receiving signal.
|
| You should be able to inject an audio signal such as from a CD or mP3into the radio at the volume control. The set will...MrFixr55 — 08:14 PM |
|
Who's Online
|
There are currently 578 online users. [Complete List]
» 2 Member(s) | 576 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
