Posts: 299
Threads: 107
Joined: Mar 2011
City: Sheboygan Falls,Wisconsin
Okay guys, you talked me into it  ! I just got my latest Craigslist find home a few minutes ago. Here are some quick pics. Haven't even had much time to look at it but it looks pretty clean inside. It has a few cabinet issues but nothing I can't fix. Cabinet styling doesn't do much for me but it IS a Mystery Control set and for $65 I'm pretty happy about it  Gotta go and figure out where to put this beast!
Kevin
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Those pics were so quick that I completely missed them...
But seriously, congratulations! 
--
Ron Ramirez
Ferdinand IN
Posts: 299
Threads: 107
Joined: Mar 2011
City: Sheboygan Falls,Wisconsin
Posts: 16,495
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
It is also pretty clean. Congrats!
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
I see the Mystery Control frequency is a Code 6 on the radio chassis rear. Is there a corresponding "6" inside the Mystery Control? If so, then, the MC is the original to the set. Otherwise the MC can be re-tuned to match your set. BatteryMaker, a member here, can provide a repro MC control battery for you.
Good catch,
Chuck
Posts: 299
Threads: 107
Joined: Mar 2011
City: Sheboygan Falls,Wisconsin
Yes, there is a number 6 stamped on the serial number label.
Kevin
Posts: 1,531
Threads: 242
Joined: Sep 2012
City: West Bend, Wisconsin
Very nice! Congratulations
Greg V.
West Bend, WI
Member WARCI.org
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Very nice when you get the set and original control with Mystery sets.
Patience is needed, as you can see from the chassis. ;)
Good luck,
Chuck
Posts: 335
Threads: 50
Joined: Apr 2011
City: Apple Creek
State, Province, Country: Ohio
Kevin,
Nice score! If you need any parts let me know I still have a junk chassis and a bunch of parts from two other chassis that came from a 39-116 and a 40-205 which also were mystery control sets. I have restored a 39-55 and a 39-116 you're going to love replacing all that crumbling wiring.
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
Looks quite nice! Congrats on scoring it complete with the controller! I have a mystery control model an old gentleman gave me a few years back, but he never had the control.
No matter where you go, there you are.
Posts: 4,877
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
That's not too bad of a find since it has the control box still with it, too bad about the large chip out of the door. With regard to the battery for the control I'm not sure whether Mr. Morris the Batterymaker still makes those, he does still have the artwork however.
Regards
Arran
(This post was last modified: 06-17-2013, 08:22 PM by Arran.)
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Hi
Nice Radio, I have the 39-116 with the remote. I have the radio working I recapped it and replace a lot of the rubber wire.  It is a good reciever and the audio is very good. I think the 39-55 has the same audio as the 39-116.  The 39-116 has a shortwave band and that is the only diff I think. So I think you will like the sound of the radio. I do. I need to get the remote working but I am lazy I guess.  I have to get a battery before I can check it tho.
Joe
Joe Bratcher near Louisville, KY
Posts: 299
Threads: 107
Joined: Mar 2011
City: Sheboygan Falls,Wisconsin
Thanks guys! I'm pretty happy with it overall. The chassis looks to be in very good shape, but I haven't had a chance to pull it out and look underneath yet. I had my first taste of replacing crumbling wire with my 40-150 so not in much of a hurry to start on this one! May be a winter project. The cabinet does have some veneer issues, but I enjoy working on the cabinets anyway, so I pretty confidant I can fix them.
So, I'm just going to clean it up and put it on the back burner for now. I will post some pics of the chassis when I get it out.
Kevin
Posts: 4,877
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
No the 39-116 also has a tuned RF amplifier stage, and it has three bands as opposed to the 39-55 which only has the AM broadcast band. Basically the radio section uses six tubes, the remote receiver uses four tubes, and while it has push pull outputs it looks like they used the screen grid inversion trick like they did on the 40-180. One other good thing about this set is that the grille cloth looks like it's in good condition which is always a bonus.
Regards
Arran
(This post was last modified: 06-18-2013, 10:19 PM by Arran.)
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco model 40-100
|
| Marion;
By "newer style" carbon resistors do you mean the molded type with coloured bands rather then the BE...Arran — 01:00 AM |
|
Philco 46-480 Electronic Restoration
|
| hello jrblasde ,
your radio sounds great well done !!
I bought like 20 years ago a Philco 610b that someone had painte...radiorich — 11:50 PM |
|
Philco model 40-100
|
| Arran,
I just can't tell if the volume control has been replaced. The control has a brass shaft with one half flat for ...mhamby — 11:08 PM |
|
Philco model 40-100
|
| You may be able to make the part out of wood. The particular vendor has a habit of disassembling radios and selling the...MrFixr55 — 10:09 PM |
|
Philco 46-480 Electronic Restoration
|
| Used to get to Bentonville when I worked for a Walmart vendor....nice and sleepy back then. PaulPaul Philco322 — 09:49 PM |
|
Philco Model 249 made in England
|
| Did Garrard produce stand-alone turntables? The reason I ask is, when I was a kid my grandfather gave me a KLH Model 20 ...jrblasde — 09:37 PM |
|
Philco Model 249 made in England
|
| Neat looking set, definitely Euro- style. I am guessing that this is solidstate due to the vent holes (or lack thereof,...MrFixr55 — 09:32 PM |
|
Philco 46-480 Electronic Restoration
|
| Haha, thank you sir! I’ve been eyeballing a 47-1230 console for sale over north of Bentonville, Arkansas for a while. Pr...jrblasde — 09:18 PM |
|
Philco 46-480 Electronic Restoration
|
| @ Joseph, get off the porch and run with the dogs. You fixed one, grab another. @ Morzh, I think that we are the same ...MrFixr55 — 08:59 PM |
|
Philco Model 249 made in England
|
| Wow! Now that is something! I’ve never seen a Philco like that, but it’s pretty mid-century.jrblasde — 06:40 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
! I took the mystery control cover off and it appears to have the original bettery pack still installed as well as a Philco 30 Tube, pretty neat. Also the wiring is still in beautiful condition.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
