Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help identifying this phonograph? E1764 or E1765 from 1957?
#1

We've found this in my wife's, Grandmothers attic after she passed. It looks to be in very good condition, so we're trying to decide if we should keep it or sell it. Part of that will be determining what it actually is Icon_smile

This is a picture that my wife just sent me to do some research on. Unfortunately she didn't look for a model number tag anywhere, but I'll do that when I get over there too. In the meantime, I thought maybe the experts could help out Icon_smile

If anyone can give an estimated value of something like this, that would be great too.


Attached Files Image(s)
   
#2

As a general observation of mine, sets of this era... how to put it politely? I suspect its sentimental value far surpasses the cash value you could get out of it under just about any circumstance. They aren't quite old enough to be considered "antique" yet, but if you find the right hipster...
#3

Ha, no sentimental value with it all, which is why I'm here asking about it Icon_smile

We may keep it an re-purpose the cabinet, I'm going to plug it in and see if it works tomorrow.
#4

HHHHHHHHIcon_exclaim That's, like,uh,un-jivey, man... another one, like,uh, headed down to the lower depths in the pit of despair. Man. Daddy-o. That's cruel... Icon_think Sorry. Couldn't resist. Icon_mrgreen But that does look to be in pristine shape (from the blurry photo)
#5

Does it have a radio in it as well or just the phonograph?
Regards
Arran
#6

J2K Wrote:I'm going to plug it in and see if it works tomorrow.

[Image: http://i326.photobucket.com/albums/k420/...g~original]

This is the worst thing you can do to a piece of vintage electronic equipment, because it is a big gamble. It may work...it may smoke...it may trip a breaker. Or it could even catch on fire.

Vintage electronics should be thoroughly checked by someone who knows what to look for (bad electrolytic capacitors which should always be replaced before applying power, any tar or wax seeping from power transformers) before power is applied.

http://www.philcoradio.com/tech/plugin.htm
http://www.antiqueradio.org/powerup.htm

But if you're determined to really plug it in and see what happens...all I can do is quote Clint Eastwood:

...You've gotta ask yourself a question. Do I feel lucky? ...Well, do ya, punk?

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Help with Supreme 599
Iam getting closer to fixing it. I bumped Up the tranny voltage to get 5v on the 80 tube. I gan get the needle to move ...daveone23 — 03:41 PM
Philco 42-345 Restoration/Repair
Hello RodB, Checking my previous post I realized you're the one with the 42-340. I replaced the string for the tuning...osanders0311 — 03:12 PM
5U4 vs 5Z4 tubes
I saw no evidence of anything going wrong. The transformer is fused already which is nice. Interestingly the 5z4 did...bridkarl — 02:37 PM
5U4 vs 5Z4 tubes
I doubt anything cooked in 30 seconds because of the oops! These are very similar tubes, and nothing but transformer re...GarySP — 02:30 PM
Restoration of the Canadian General Electric A-87
Paul Philco322.You will be keeping very busy, you may have to go back to work for a breakIcon_smile. Paul To rel...RadioSvit — 01:57 PM
5U4 vs 5Z4 tubes
I grabbed the wrong tube and put in a 5U4 tube instead of the 5Z4 - I just had the rectifier in with no other tubes. Af...bridkarl — 01:54 PM
Restoration of the Canadian General Electric A-87
After applying the filler to the entire body, I noticed that the shades of the facade and the side and top walls were ve...RadioSvit — 01:49 PM
Restoration of the Canadian General Electric A-87
You will be keeping very busy, you may have to go back to work for a break:). PaulPaul Philco322 — 01:46 PM
Restoration of the Canadian General Electric A-87
After removing the control knobs, chassis, dynamics and scale frame, I first started restoring the torn piece of veneer....RadioSvit — 01:20 PM
Restoration of the Canadian General Electric A-87
Ok.... In the fourth year of the war, I still decided to return to an active hobby. For more than three years, I did not...RadioSvit — 10:43 AM

[-]
Who's Online
There are currently no members online.

>