Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 118x
#1

Hi fellow collectors,

I've a chance to pick up a Philco 118x console in my area, going cheap for around $30. Currently it's painted white which is sad, but I'm sure with some basic cabinet stripping it could be OK.

Opinions? Worth it?? Owner claims the chassis is complete and working

73 de,

Gary/N9VU
#2

Hi Gary

The chassis alone is worth $30 easy...go for it! Icon_smile

I once had to restore a Model 84 cathedral that had been painted white. I know a local collector who is good a refinishing cabinets, so I let him deal with the white paint while I fixed the electronics. In this case, the white paint had been applied over the original finish, making it easier to strip off. Hopefully your 118 will be easy to strip, also.

--
Ron Ramirez
Ferdinand IN
#3

Ron Ramirez Wrote:Hi Gary

The chassis alone is worth $30 easy...go for it! Icon_smile

I once had to restore a Model 84 cathedral that had been painted white. I have a local collector friend who is good a refinishing cabinets, so I let him deal with the white paint while I fixed the electronics. In this case, the white paint had been applied over the original finish, making it easier to strip off. Hopefully your 118 will be easy to strip, also.

My same thoughts as well, Ron. It reminds me of the 16x console I bought for $5 at the end of radiofest. I'm sure you are familar with the chassis it holds. The cabinet was also painted but painted over the finish so this has allot of potential.

I'll see if this local guy still has it. There's always room for another console, or is there? Icon_biggrin

73 de,

Gary/N9VU
#4

Picked this up this weekend. Works well as is but I'm sure a recapping will be in order. Painted a real cheesy white but beginning to flake off and uncover the original finish underneath. On a good note this unit even has the original back in good condition. Should make a good project.

73 de,

Gary/N9VU
#5

I have the 118MX version, nice radio well worth the money you spent on it.
#6

Reading this is giving me incentive to rebuild my 118RX two piece chairside with separate speaker. It really looks like a decent set with triode connected 42s in class A. The speaker in this set is 12 inches but is a pemanent magnet type, sort of like a big version of their farm set speakers. I wonder if this speaker will sound as good as the electrodynamics in the other versions of the 118. They apparently learned not to run high voltage and AC power through the speaker connecting cable by this time as it is only two conductor line cord in this set.

Fred R
#7

49Stude63 Wrote:I have the 118MX version, nice radio well worth the money you spent on it.

I always thought it was worth it but if your photos indicate what's underneath all that nasty white paint, it looks like an enjoyable set.

73 de,

Gary/N9VU




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 3633 online users. [Complete List]
» 2 Member(s) | 3631 Guest(s)
AvatarAvatar

>