Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Restoration of UK Philco 282 Empire Five
#16

Now, with the proper dial lamp holder in place, I moved the other lamp bracket so it can be used as a lamp for the shadowmeter in the 282.

[Image: http://philcoradio.com/images/phorum/282...ive/16.jpg]

[Image: http://philcoradio.com/images/phorum/282...ive/17.jpg]

--
Ron Ramirez
Ferdinand IN
#17

Now, once again listening to AM 740 from Toronto. Only now, light is coming through the shadowmeter for the first time in who knows when.
I still need to replace the rubber mounts on the 282's tuning condenser. And once the weather warms up again, I will probably give the chassis a good cleaning.
Now the the shadowmeter is illuminated, I have discovered that the vane does not move. Nice. It has continuity but isn't working.
Oh, well. I am going to set this one aside for awhile and move on to another project.

[Image: http://philcoradio.com/images/phorum/282...ive/18.jpg]

--
Ron Ramirez
Ferdinand IN
#18

Nice write up Ron, I am going to have to replace the gromments on the 582 and it will need a speaker, its next on the restore list.
#19

What brand are the tubes (valves) and where were they made




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>