Restoring my 37-116. It plays now!
Posts: 1,106
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
I've personally found that (soaking in) Simple Green does wonders for knob residue. A toothbrush, applied while the knob is still wet, will get any stubborn leftovers. I've done this many times, and the knobs come out looking like new.
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
6J5 is about as simple as it gets. Metal version must have pin 1 to ground with no other ties of convenience, glass versions may require shield. 6C5 can sub if you have one 99%.
Posts: 16,505
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
Looks Good! Big improvement!!
Terry
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Very nice example, Mike!! And with the 6A5 output system!!
Posts: 16,505
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
AND it sounds like that with OLD WEAK (officially weak according to the tester) 6A5 tubes.
And I did buy the new ones off of Bob Dobush! I thought the originals would work but bought the newer anyway just in case.
(In fact I had to change just three tubes, two 6J5 and the rectifier.)
They sound terrific!!!
Well, now I need to take that oatmeal residue off and then try some of that "Wine'n'Dine" or "Feed'n'breed", forgot which one it is....supposedly it will rid me of the necessity to do the full resto one day, and, what's better - of thinking of it
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
(This post was last modified: 09-08-2013, 09:07 PM by TA Forbes.)
Posts: 16,505
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Really? What do they use to hold the rugs? And do they cover themselves in GoJo first and then rub against the radio?
Gosh, I'd love to see that!
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yep! Really!!
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Morzh, that radio is looking great! Good job! ..
The artist formerly known as Puhpow! 8)
Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Great looking radio......Job well done another one saved and able to sing again give yourself a hand!
Posts: 481
Threads: 18
Joined: Jan 2013
City: Mesa, AZ
'Tis but an far cry from "whence it was".  glorious!!!
Posts: 16,505
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Oh' c'mon guys, you make me blush - I just cleaned it with GoJo....any one of you would make this cabinet orders of magnitude more gorgeous.
It's just the radio is so beautiful it looks good even without proper cabinet restoration.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
OK.... I guess that means you don't want the "candy-gram" I was having the Rutgers Bikini-Radio-Washing Team deliver to you
Posts: 479
Threads: 73
Joined: Mar 2012
City: Riverside, CA
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco 42-345 Restoration/Repair
|
The more the better. (Within reasonable limits.)
2-5 times more is no problem in this case.Vlad95 — 03:50 PM |
Philco 42-345 Restoration/Repair
|
Thanks, RodB and Vlad95,
I was mainly trying to figure out this capacitor to locate a replacement, Vlad thank you for...osanders0311 — 03:44 PM |
Testing a speaker and output transformer Trutone A2-G
|
Would an output transformer if weak, cause the problems I am seeing with lower B+ voltage?
murfmurf — 01:22 PM |
Testing a speaker and output transformer Trutone A2-G
|
Hello murf! I merged the threads. Please do not start new threads regarding the same radio. Take care, - GaryGarySP — 10:21 PM |
Philco 42-345 Restoration/Repair
|
Regarding picture 5 on page 1 of this thread this capacitor is #40 on scematics diagram - 4mF+4mF. Black wire is "-...Vlad95 — 09:01 PM |
Philco 42-345 Restoration/Repair
|
That's a dual 4 MFD, red and green are both 4mfd and black is common negative. You should be able to see them in the pow...RodB — 08:58 PM |
Philco 42-345 Restoration/Repair
|
Can anyone help me figure out a capacitor that has 3 wires coming out of it red and green on one side and a black wire o...osanders0311 — 08:14 PM |
Two small radios from France. Restoration and review.
|
Greetings;
I think that it's possible that the assortment of components was the result of post war parts shortages, a...Arran — 12:18 PM |
Philco model 38 code 121 not receiving signal.
|
Unfortunately I can't inject any audio into the volume control. It is in the primary circuit of the antenna coil, not in...Stormlord5500 — 09:32 AM |
Philco model 38 code 121 not receiving signal.
|
Sounds good Gary I'll do that. I have plenty of stuff like that I can scrounge up. I am still kind of new to all this so...Stormlord5500 — 08:47 AM |
Who's Online
|
There are currently 401 online users. [Complete List] » 1 Member(s) | 400 Guest(s)
|
|
|

|