Philco 37-116 and Zenith 9S-262
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Well, now that I assembled the Philco, what could I say - beats the pants off of the Zenith.
And no extra noises on local any time of the day. With no antenna at all!
This is some sound!!!
I think though it is not necessarily those clarifiers. It's just the speaker is monstrous. I though the Z had a big one...this probably weighs twice as much. The bass is to die for. Almost like Hi-Fi stereo and it is the local AM station.
Posts: 481
Threads: 18
Joined: Jan 2013
City: Mesa, AZ
Well, it DOES say "high fidelity" under the Philco label.
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
To get the best of it I add the treble some - I cannot do it too much, but it sounds really nice, and put the bass to the max.
But, boy oh boy, does it fill up the house.
And it is not even in the big room yet!
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
I have a pair of 116X's (1936 console) that one is missing the two small clairifers. Was thinking I would for the heck of it replace those with a couple of modern speakers with built-in tweeters. The speaker in the set isn't quite as large as the 37-116 but the audio set up is similar as it uses a pair of 6A3's (4 pin 6B4) and a 42 driver (6 pin 6F6G). First got to get them working!
Terry
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
Mike,
That reminds me of when I was a kid I use to play the radio before falling asleep. I remember quite well my dad saying from the other end of the house "TURN THAT D?@N THING DOWN!!!" Happen just about every night. Ah the fond memories of childhood. Didn't seem all that loud to me.
Terry
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
We did not have any radios that would sound this good. FOr that matter I do not think we had radios with variable IF band or HiFi AM.
Though FM was there of course but I don't remember much going on there at all. Let alone the music was such that it did not require HiFi...not in radios.
As for you 116x, you wil thereby convert it into 690 ![Icon_smile Icon_smile](https://philcoradio.com/phorum/images/smilies/icon_smile.gif) or close to that.
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Hmmmm, the idea of adding mid-range and "tweets" to the 1936 116X intrigues me!!!
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
I don't have one running yet so I'm not quite sure of the balance between high and low fq and how will pan out. Certainly could use a cap or padder to balance it out. I'm thinking it would have as much lows as the 37 model or as much high as it doesn't have variable bandwidth. Hummm could stagger tune the IF's . Just some thoughts rattling around in my brain.
Terry
(This post was last modified: 09-07-2013, 09:09 PM by Radioroslyn.)
Posts: 1,456
Threads: 96
Joined: Jul 2012
City: Poughkeepsie, N.Y.
My Philco 38-116 beats the pants off my Zenith 12s-265. No problems hands down. Me personally I think the Z brand is very over rated. Where would they be in the radio collecting comunity if no one was interested in the Stats or Waltons? How do you guys feel?
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
My Zenith 12-A-3 works as good as or better than my Philco 37-116 Deluxe of course it has the advantage of being 3 years newer, The Zenith was a lot easier to restore even with the rubber wire.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
It is quite possible, but then it probably has a bigger speaker than the 9-tube one I have.
I guess I will have to get me the 38-690 to beat that one.
But then I have to take your word for it, as myself I did not have a chance to compare a 12-tube Z to 37-116.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
The 12A3 was a better radio than many of the earlier "Z" 12-tube sets, because they added a second stage of IF amplification.
HOWEVER, we must agree to disagree about the 37-116 vs 12A3 comparison.
Really......
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Which part? The easier to restore or the works as good or better - or both?
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Easier to restore? Hmmmm.....
37-116 chassis definitely more difficult.
cabinets: a toss-up between the two.
Better radio? MY opinion the 37-116 is the better set
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
PT-6 antenna connections
|
Hi Bridcarl
+1 on the others. Pin 6 of the 7C6 is the AVC Diode so it is appropriate that that pin 4 of the coil con...MrFixr55 — 07:30 AM |
462ron
|
Joseph, this is beyond awesome. A lot of thought and engineering went into this and you hit a home run! Now I must save ...462ron — 07:27 AM |
Cannot Adjust an IF Transformer’s cores
|
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM |
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Who's Online
|
There are currently 3624 online users. [Complete List] » 3 Member(s) | 3621 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|