My Next Project - Butterfly Radio
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
I thought I would share my next restoration project. It's a sad little Philco Model 45 that needs quite a bit of help. Normally I would do the chassis first, but winter is approaching and I'm gonna knock out as many cabinets as I can this fall. Here it is..
As you can see, it has some old glue caked into the slots. Anyone got any ideas on how to get it off the wood?
One more thing... I don't create these threads to show you I am the forum expert on refinishing. Actually, it is the opposite.. I'm no expert at all. My goal is simply to encourage everyone to try their hand at repairing and refinishing cabinets. Hey, if a guy named Puhpow can get decent results, so can you!
The artist formerly known as Puhpow! 8)
(This post was last modified: 10-02-2013, 07:37 AM by Jamie.)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Now, I'd like to see how you replicate the louvers in the top plus the two raised bars in the top. (It looks like someone removed the original cabinet top and installed a plain piece of wood in its place.) Good luck!
--
Ron Ramirez
Ferdinand IN
Posts: 2,570
Threads: 336
Joined: Jun 2013
City: lawrenceville nj
ohh sounds like a challenge to me
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
heheh.. it sure does!.. I've been asking myself those same questions. I'm trying to find good photos of a 45, so I can decide the next move.
The artist formerly known as Puhpow! 8)
Posts: 240
Threads: 27
Joined: Jun 2013
City: Boulder, Colorado
Hi All;
PuhPow, I want to Thank You for the picture, I at least now know what knobs my Radio would take..
THANK YOU Marty
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I agree with Ron, I think that is exactly what happened, the original top came off, or suffered some other damage, so someone put a piece of thin plywood in it's place. The original may have been laminated too but thicker, and it had a tongue to fit into the groove on each side, the grooves that have since broken away. That cabinet needs a little more help then some wood filler and lacquer can offer on short notice. I would work on something else first that doesn't need so much reconstructive surgery.
Regards
Arran
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Nahhh.. I'm not shy. The new top will be created this week. Stay tuned...
The artist formerly known as Puhpow! 8)
(This post was last modified: 10-05-2013, 09:26 AM by Jamie.)
Posts: 4,369
Threads: 410
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Good luck kid! My 45L has a very nice tone to it. I hope your version looks good and sounds super when done. Keep us posted.
Regards,
paul
Tubetalk1
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Thanks Paul! .. I found some great photos of an original 45 on Ebay. A very good friend of mine has a woodworking setup in his basement... routers, lathes, you name it. He offered to help me make the new top. (Translated - he's gonna make it, and I'm gonna watch..8)) I've got my cabinet stripped and I'm taking it over there tomorrow. He's going to look at it and tell me what kind of wood to buy.
Tomorrow afternoon, I'll go buy the wood and any veneer required and then make the top on Thursday. So if all goes well, I should have some photos soon.
The artist formerly known as Puhpow! 8)
(This post was last modified: 10-05-2013, 06:58 PM by Jamie.)
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Yes! We have a top! ![Icon_thumbup Icon_thumbup](https://philcoradio.com/phorum/images/smilies/icon_thumbup.gif) Today was a productive day. Of course the top still needs to be glued together, sanded and sealed... but it's coming along...
The artist formerly known as Puhpow! 8)
(This post was last modified: 10-06-2013, 03:33 PM by Jamie.)
Posts: 479
Threads: 73
Joined: Mar 2012
City: Riverside, CA
Posts: 2,570
Threads: 336
Joined: Jun 2013
City: lawrenceville nj
hmm think puhpow is smuggling gold in his radios. top may be wood decal
Posts: 240
Threads: 27
Joined: Jun 2013
City: Boulder, Colorado
Hi All;
PuhPow, Looks Great.. Did You maybe work for Philco in Your Younger years , Or just dream of Working for them ??
THANK YOU Marty
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Thanks guys! .. Murph, if it ever became work, I wouldn't want to do it.
This radio is still a long way from being finished. The top looks pretty good, but there are still some issues left to contend with..
The artist formerly known as Puhpow! 8)
Posts: 61
Threads: 2
Joined: Aug 2013
City: Renton, Wa
PuhPow--is that the original top--or did you make ? looks good
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Rare zenith 6s137 restore
|
All of these restorations are two projects. The chassis and the cabinet. You're done with the chassis.
I would keep ...RodB — 01:29 PM |
PT-6 antenna connections
|
Thanks. The transformer tested per your numbers. Checked the wiring and it appears to be good. I’ll move on to checking ...bridkarl — 12:37 PM |
GE Model P-975F
|
There are 2 of these on ePay and several pics on Radiomuseum. Although the front looks like a very popular Hong Kong ra...MrFixr55 — 09:26 AM |
Rare zenith 6s137 restore
|
Hi Fred,
I get things to work, but what you, Russ, RadioSvit and many others on the Phorum do with cabinet and chassis...MrFixr55 — 09:02 AM |
PT-6 antenna connections
|
Hi Bridcarl
+1 on the others. Pin 6 of the 7C6 is the AVC Diode so it is appropriate that that pin 4 of the coil con...MrFixr55 — 07:30 AM |
462ron
|
Joseph, this is beyond awesome. A lot of thought and engineering went into this and you hit a home run! Now I must save ...462ron — 07:27 AM |
Cannot Adjust an IF Transformer’s cores
|
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM |
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
Who's Online
|
There are currently 3168 online users. [Complete List] » 1 Member(s) | 3167 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|