Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

My Next Project - worse than the last?
#31

You'll do great. One thing I always tell myself - the worst that can happen is you have to strip it again and start over again. Which is a lot better than screwing up a chassis and ruining some rare part.

The artist formerly known as Puhpow! 8)
#32

   

   

I got an early start today. Top photo is the cabinet after a date with Mr. Mohawk. I used a light coat of Light Oak/Natural Ultra Classic Toner. I had planned to add some dark walnut to the sides, but I think it looks good now.

As soon as the toner dried, I replaced the original decal... next up, is clear coat, and this cabinet will be finished. 8)

The artist formerly known as Puhpow! 8)
#33

   

From this...

   

To this...

Final clear coats, some new brass screws, and some brasso.. and she's all ready for the chassis..Icon_thumbup .. I am very happy!

The artist formerly known as Puhpow! 8)
#34

That looks really great! Good save, I don't think I would have tried a cabinet that far gone. Maybe some day.
#35

Beautiful!
Icon_clap

Tim
#36

Fantastic! Icon_thumbup Icon_thumbup Icon_thumbup

Steve

M R Radios   C M Tubes
#37

Thanks everyone. It means a lot to read your compliments. Glad you like it.

The artist formerly known as Puhpow! 8)
#38

Icon_thumbupIcon_thumbupIcon_thumbup
Looks great!
#39

Just amazing. Maybe I'll put getting to your level of artisanship on my bucket list. Icon_smile
#40

Great job!!! From a sad case at best to "purt near" brand new showroom condition. You should proudly display that set. Take care, Gary.

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
#41

Hello everyone, and especially Aaran, When I suggested steaming the cabinet in a pot, I didn't mean cooking it until it was cellulose mush. At no more than 10 minutes steaming, only the thin porous veneer will have the opportunity to absorb any appreciable amount of moisture. It sucks it in like a sponge! The heavier wood components will not have had enough time to moisten anything but their surface. I used this method to repair an antique mahogany jewelry box for a friend that had gotten soaked in a basement flood and stretched apart very similarly to this radio. It worked great. Just another two cents worth. Take care, Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan




Users browsing this thread: 7 Guest(s)
[-]
Recent Posts
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural....morzh — 08:40 PM
Shadow Meter Bulb
Ross I am not sure what current limiting effect the incandescent provides. They are two different parts of the sch...morzh — 08:31 PM
12' Philco
Bob Thanks for that photo. I have been looking for it, and I cannot find anythinmg on the web. I forgot it was here...morzh — 08:29 PM
Shadow Meter Bulb
I think after all has been said, I will use the same bulb that is specified for the dial pilot light which is a #55. I ...georgetownjohn — 07:31 PM
12' Philco
There was also this Philco! klondike98 — 07:25 PM
HiFi (Chifi) tube amp build - but my own design.
I expected a challenge and this is just part of it. But, it's also supposed to be fun, entertaining, informative and enj...TV MAN — 07:12 PM
Shadow Meter Bulb
Butting in here with a question. Since the shadow meter is connected directly to the 1st and 2nd I.F.'s wouldn't the met...RossH — 06:43 PM
HiFi (Chifi) tube amp build - but my own design.
Mike, Tim; you are about to enter the twilight zone. Doo doo doo doo, doo doo doo doo This is something alright. I'm go...RodB — 06:26 PM
HiFi (Chifi) tube amp build - but my own design.
:lol: We need to start a singing radio group! I play the guitar, so maybe get a few vocals? Anyways, Mike, I did try mou...TV MAN — 05:56 PM
HiFi (Chifi) tube amp build - but my own design.
And so does a barber shop quartet. mmmmmmRodB — 03:54 PM

[-]
Who's Online
There are currently 6639 online users. [Complete List]
» 3 Member(s) | 6636 Guest(s)
AvatarAvatarAvatar

>