Posts: 1,107
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
I got this old Philco a while back. Not sure what model it is, but a 54, 57 or 59 I think.
When I got it, it was painted the UGLIEST shade of brown. It's SO ugly I can't even describe it without using some of Carlin's "Seven Words"..
Last night, after having finished the chassis restoration, I commenced to strip that awful paint off, figuring that anything I could do to it would have to be an improvement. Imagine my surprise and befuddlement when I found what was underneath:
Now, WHY would anyone cover this beautiful grain with that horrid paint? The white spot on the upper left is wood putty where I'm patching a bit of a gouge before I refinish it.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
It's a model 57C. Yes, looks much better without the brown paint.
Who knows what motivates people to paint things which were never painted originally. Myself, I will never understand the logic (or, more appropriately, the lack thereof) of painting things white, making them look "distressed" and adding some decals, then selling it as "shabby chic." I have a different name for it...substituting one of Carlin's seven words for "chic"...
--
Ron Ramirez
Ferdinand IN
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
+ One Brenda, I'am glad to see you got a hold of that radio. Looks like it will clean up nicely.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Great job and really lovely looking wood Brenda. At least it wasn't painted white! Who knows why it would be painted? Let's see how it goes together and looks when your done.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 1,107
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
Ron,
Do I need to find a PHILCO decal for this? It seems to be missing something...
Posts: 5,060
Threads: 269
Joined: Nov 2012
City: Bandon
State, Province, Country: OR
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Brenda
What Bob said, plus you'll want a DCL-PH8 from Radio Daze to replace the missing PHILCO decal.
--
Ron Ramirez
Ferdinand IN
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
There is one benefit to someone painting a wood cabinet with a thick layer of paint, it does an excellent job of protecting the wood from dents and gouges. It also turns off a lot of potential buyers making such radios cheaper to buy.
Regards
Arran
Posts: 1,107
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
Good point, Arran.
Thanks Ron and Bob. I ordered the decals and some knob washers.
Posts: 1,107
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
Does anyone do repros of the brass foil dial?
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I wish I knew of someone reproducing the foil dials, I know of a Rogers "Pee wee" set like that Philco that has the same problem. Radio Daze was hinting that they might make some foil dials so you may check with them. They are sort of strange, it's like a heavy aluminum foil that was pressed to give a faux medallion relief effect, in the case of the Rogers I saw the background was painted black. It's too bad that they didn't make them like the brass and aluminum serial number plates, then you could clean them up and repaint them.
Regards
Arran
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
Who's Online
|
There are currently 4108 online users. [Complete List] » 1 Member(s) | 4107 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|