Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

91X winter project
#1

Hey all,
Well, now that the long nights and cold weather have come to Wisconsin, I can start another project. I bought this 91 chassis on Ebay awhile back to use for parts on a 91 cathedral I have. After looking at it I realized that this was the chassis for the dual speaker console of which I just happen to have an empty cabinet forIcon_thumbup So, I'm starting restoration on the chassis and will do the cabinet next spring. The chassis is pretty dirty but is complete, and it looks like the only repair it ever had was one filter cap replaced. Suprisingly, I even have a matching Mershon cap to replace it with. Unfortunately, the shadowmeter coil tests open, I'll have to look at it and maybe I will be able to repair it rather than rewind it.
[Image: http://i1160.photobucket.com/albums/q500...444d12.jpg]
[Image: http://i1160.photobucket.com/albums/q500...d98d17.jpg]
[Image: http://i1160.photobucket.com/albums/q500...cc7867.jpg]
[Image: http://i1160.photobucket.com/albums/q500...1efc55.jpg]
Should keep me busy for awhile!
Kevin
#2

Kevin that looks like a good winter project. Sure looks unmolested. Are the globe type tubes original and has that transformer in upper middle of pic been hot ?
Good luck.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4296 online users. [Complete List]
» 1 Member(s) | 4295 Guest(s)
Avatar

>