Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model E976
#1

Hello everyone....newbie here. I am very interested in beginning a small collection of vintage/antique radios and have the opportunity to start my collection with a Philco model E976. I know this model to be from 1957 and was the only tabletop that year to offer AM/FM/SB. I realize value is very subjective but was wondering what any one here knows about this model. It is in extraordinary condition and everything appears to work 100%. Any info would be greatly appreciated and I look forward to meeting and talking with everyone here....thanks!!![/font]
#2

Welcome to the Phorum! One sold on Ebay last month for $52 plus shipping; a blond (fruitwood) verson of one had no bids in December (with a starting ask of $49.99); and there were no bids on another in June (starting ask of $49). If you've got one available to buy, its in nice shape and playing...go for itIcon_thumbup
#3

Hey, Welcome to the forum!

When you mentioned that everything worked 100%, does that mean this radio has been serviced? Among other things, the electrolytic and paper capacitors as well as all out of tolerance resisters need to be replaced. If the radio hums, that would be a sure sign the electrolytic capacitors need replacement. I would make sure of that before plugging it in and turning it on. If these items have not been replaced, you are living on borrowed time.

A really good site for newbies is Phils old radios at www.antiqueradio.org. Check out his beginners section.

Good luck, whatever you decide to do.

Tom




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM

[-]
Who's Online
There are currently no members online.

>