Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Early Philco 16 chassis with 5 bands/dual drive??
#1

http://www.ebay.com/itm/Philco-radio-16b...3cdaa9a578

This is for sale on eBay. Notice that it is an early model 16 five band chassis, BUT it has what appears to be a dual drive tuning contol.

Icon_eh
#2

These do have dual drive tuning (push-pull).
#3

Look closely at the front view of the chassis, that is clearly a concentric tuning shaft. Tom is right.

Notice also the rivets on the dial scale, which are obviously not original.

Something's rotten in Denmark, methinks...

--
Ron Ramirez
Ferdinand IN
#4

Wow who could of concocked that setup.....something is fishy.
#5

Could be. The power transformer and condenser bank are early five-band. The dial is an easily replaced item, not so for the dual drive. At least, I don't think it is easy.

Another Phranken?

I am tempted to make an offer just to see what is goin g on with this set....
#6

It's not strictly kosher, but one does have to grudgingly admire the work. Maybe the guy simply couldn't get the original tuning setup, and did what he could to get the radio back into service? It's rather clever, actually. What would you say that mech came from? Maybe one of the 600 series?
#7

+1....

My curiosity about this chassis is large. Dual drive with five bands is a neat combination.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM

[-]
Who's Online
There are currently 6344 online users. [Complete List]
» 2 Member(s) | 6342 Guest(s)
AvatarAvatar

>