Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help: Philco-Ford Console Stereo
#1

Hello I am new to this forum and to Philco/Philco-Ford in general.

I recently acquired a Philco-Ford solid state stereo console and I have been restoring it. I will include a bunch of pictures at the end of this post.

Question 1: I have no idea what kind of stereo it is - does anyone know the model?

Question 2: Everything appears to work. But I think I am missing the needle for the turntable (I have no idea). I have never used a turntable before (I am just 24). Does anyone know where I can get a replacement needle and how to install it?

Thank you for any help,

Seth

[Image: https://scontent-a-iad.xx.fbcdn.net/hpho...4121_n.jpg]

[Image: https://scontent-a-iad.xx.fbcdn.net/hpho...4130_n.jpg]

[Image: https://fbcdn-sphotos-d-a.akamaihd.net/h...1377_n.jpg]

[Image: https://scontent-a-iad.xx.fbcdn.net/hpho...1529_n.jpg]

[Image: https://scontent-a-iad.xx.fbcdn.net/hpho...8314_n.jpg]

[Image: https://scontent-b-iad.xx.fbcdn.net/hpho...4739_n.jpg]

[Image: https://scontent-b-iad.xx.fbcdn.net/hpho...1747_n.jpg]

[Image: https://scontent-b-iad.xx.fbcdn.net/hpho...2977_n.jpg]
#2

It is not a needle - it is called "cartridge". Modern (OK, they are no longer modern but they lingered 'till end of 90s, that makes them modern) turntables use them, and they are electromagnetic pickups.

Examples:

http://www.bhphotovideo.com/bnh/controll...&A=details
http://www.zzounds.com/item--AUTCN5625AL


Some of the tone arms have sockets to connect, some have wires with clips that will go on the cartrige's pins.
Go online, type in "turntable cartrige", contact the seller, give them the model and see if they recommend something.
#3

Actually, Morzh, the cartridge appears to still be there - the stylus (proper terminology for what some folks call needle) is missing.

Without a model number for the unit, there is no way to know...???

--
Ron Ramirez
Ferdinand IN
#4

Ron

OK if it is there (yes I know the stilus word - just do not use a cartridge with a separate stilus) then
http://www.planetdj.com/i--STYLUS15&?utm...googlebase


Thing is I use the single piece cartrige, with no separable stilus. THose are sold as one unit. Although yes, I used to own one with separable...they are a bit inferior, and the price often shows it.
#5

Seth,
Welcome to the Phorum. Pull the unit away from the wall and see if there any numbers/letters on the back of the cabinet. The model number might be back there.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Help with Readrite 410 tube tester
I fixed it. The filament selector switch is not that great of quality. Cleaned it and it takes some fiddling with to get...daveone23 — 06:58 AM
Looking for place to donate unique Philco Philco J-1930 Prototype
It's a vacuum tube set and it's over 60 years old.  My uncle acquired it for my parents when Philco was done with it, an...jeibner — 10:24 PM
Looking for place to donate unique Philco Philco J-1930 Prototype
Hi J Eibner, Welcome to the Phorum.  Lots of Phriendly Pholks with Phine (See a pattern here?) advice. It is very...MrFixr55 — 09:54 PM
Philco 89B code 123 newbie
Or you can do what Terry suggests. Thx Terry for remembering that. A lot cheaper. I remember an article about that, b...MrFixr55 — 09:07 PM
Philco 48-200 alignment questions
Thanks to everybody for all the info so far. RodB, thanks for the additional info. I worked on this radio years ago a...transitony — 08:40 PM
Philco 89B code 123 newbie
Now that I've been thinking about it somewhere I saw a replacement made using a section of pvc pipe and a cap to cover t...Radioroslyn — 08:25 PM
Philco 48-200 alignment questions
Terry's gimmick cap is two insulated wires twisted together about 2 inches long, one wire attaches to the generator outp...RodB — 07:46 PM
Philco 48-200 alignment questions
Hi, in this case I would be certain that pin 7, which is B-, of the 14A7 is not "hot". If it is then reverse t...RodB — 07:39 PM
Philco 48-200 alignment questions
Yup. The gimmick is to take the place of the 100mmfd cap you don't have.Radioroslyn — 07:34 PM
Philco 48-200 alignment questions
Thanks for the reply Terry. Yes I am definitely using an isolation transformer. If I work with your method and connec...transitony — 07:29 PM

[-]
Who's Online
There are currently 2858 online users. [Complete List]
» 1 Member(s) | 2857 Guest(s)
Avatar

>