Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Hello from new member
#1

Hi My name is Tim and I just joined the forum and II hope I can learn from it and maybe I can help some one also and meet friends.
#2

Welcome to the Phorum Tim! Lots of good folks here to help you out.
#3

Welcome Tim. Don't be afraid to ask. Somebody here will have an answer for you.

Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org

#4

Hello, Tim, and welcome!

The Phorum is a great place to both learn and to meet some other collectors! In fact, in my opinion, one of the best things here are the people!!

In fact, since Mike was released from his three-week stay at the asylum, oops, I mean, his "vacation," things are even better! Icon_wink
#5

Tim,

Welcome to the Phorum. I am also a recent member having discovered the phorum maybe 6 weeks or so ago.

I've found it a wealth of info with lots of very helpful folks who like to talk "old radio", especially "Philco old radio".

Herb S.
Ithaca NY
#6

Hey Tim,

Welcome to the Phorum!

As you'll soon find out, there's lots of good information here.

Tom
#7

Ask questions, tell us what you have and what you need. Decades of experience and Tons of information available. No agendas either. Join us!
#8

Welcome Tim! I am new to the forum as well and have found everyone to be very helpful. I have been collecting and restoring radios for about 30 years so anything I can help with just let me know.

Gregb
#9

Hi Tim and welcome! I've been with this forum a little over a year now. I came in knowing only enough about electronics to be dangerous. These folks are more than willing to help every step of the way. Kept me from electrocuting myself at least a few times! Even if you aren't working on a radio you can always chime in at Old Ron's Bar and Grill. Always something going on, and you will learn something along the way. It's all good!!! Take care, Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
#10

Welcome to the Phorum and to the hobby. I hope you have lots of great old radios in your future.

Jon
#11

Welcome to the Phorum, Tim!

Make yourself comfortable a sit a spell.

It's not how bad you mess up, it's how well you can recover.
#12

Welcome!

--
Ron Ramirez
Ferdinand IN
#13

Welcome to Phorum, Tim. Plus 1 on what GarySP wrote. I have been on the Phorum about a year. I have received much help when I needed it and have learned a lot just by reading fellow members posts. The knowledge here is amazing.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
trying to identify this wire type
Here's one source for your wire of many. Take care and BE HEALTHY! GaryGarySP — 06:40 PM
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM

[-]
Who's Online
There are currently 4343 online users. [Complete List]
» 1 Member(s) | 4342 Guest(s)
Avatar

>