Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Are 40-90 and 38-12TT the same radio?
#1

http://www.ebay.com/itm/Vintage-1938-Phi...51b7e8fb98


http://www.ebay.com/itm/1940-PHILCO-MODE...4acd828333

(short of the dial - in the 38-12 the dial is from Emerson, the org one was damaged).
#2

No, they are not the same internally (although the cabinet is the same).

38-12CB is AC operated; the 40-90CB requires batteries.

38-12CB: http://www.philcoradio.com/gallery/1938c.htm#c

40-90CB: http://www.philcoradio.com/gallery/1940a.htm#e

--
Ron Ramirez
Ferdinand IN
#3

Ron

I was surprised myself as I knew that 38-12 is more or less the same as 38-15 I have only with no shortwave band. And 38-14 is close to 38-15 but is AC/DC (hot chassis).

Does it mean that the guy who listed this radio (38-12) has 40-90 chassis in it?
they look the same, those two I listed.
#4

The cabinet is the same (style), so that doesn't necessarily mean the guy's 40-90 is in a 38-12CB cabinet (although it could be). When I have a little more time, I'll take a more careful look at the auction ad.

--
Ron Ramirez
Ferdinand IN
#5

OK, just looked at both auction links, Mike. Both are 40-90CB sets. The one identified as a "38-12 TT" is a 40-90CB, and it even comes with a Silvertone Powr Shiftr battery eliminator.

And, incidentally, both have their original Philco 40-90 dials (note the large "PHILCO" near the top of each dial).

--
Ron Ramirez
Ferdinand IN
#6

Thanks Ron,

This is the answer I thought I would hear now, as after you told me there were no 38-12 with batteries, and what triggered the question in the first place was the fact that I saw the chassis being identical.....

So, given the frequency of misnomers with Philcos recently I take it it is not that rare to buy something that is in fact might be something else. However close.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Made mistake & did not label connection
Hi John, I don't have this radio, but I can supply some info: Based on your pic, pins 7,8 and 1 are used together, go...MrFixr55 — 02:02 PM
New Philco Repair Bench
As far as I know, the Repairbench does not work, and has not been working in a while. Chuck (we had that campaign looki...morzh — 01:33 PM
Radio city products 664 schematic request
Need a schematic or manual for the 664. The 663 may be similar.daveone23 — 12:38 PM
New Philco Repair Bench
Thanks Gary.dconant — 12:16 PM
New Philco Repair Bench
I tried accessing the site through our library and got the same response. It's reported to our tech gurus. GaryGarySP — 11:50 AM
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM

[-]
Who's Online
There are currently 4155 online users. [Complete List]
» 3 Member(s) | 4152 Guest(s)
AvatarAvatarAvatar

>