Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Correct grille cloth for 1935 89B table model
#1

Can someone point me to the correct name / pattern grille cloth on the Richmond Designs website (http://www.richmonddesignsinc.com/ ) for this 89B? Many thanks.

Greg V.
West Bend, WI
Member WARCI.org
#2

I think whisky rayon is the closest there is.
#3

For a 1935 89B? Like this?

http://www.philcoradio.com/gallery/1935a.htm#af

That would have used this:

[Image: http://web.archive.org/web/2005110317463...g/num5.jpg]

Pattern #5, once available from (the now defunct) Radio Grille Cloth Headquarters. No one reproduces it anymore.

By the way, the Internet Archive's Wayback Machine makes it possible to see what we once had available to us, as a reference:

http://web.archive.org/web/2006010202254...cloth.com/

--
Ron Ramirez
Ferdinand IN
#4

Yes, that's the one, Ron. Many thanks for the info.

Greg V.
West Bend, WI
Member WARCI.org




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>