Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Record Changer Issues
#1

I just got a suitcase Philco record player with what I think is the M26, three speed changer in it. Amp is all rebuilt and it currently works on 78 and 45, but the 33 rpm belt is gone and so is the 45 spindle. Also the knobs were gone for some odd reason. The biggest issue is that it picks up way too soon before the end of the record. My friend who worked on it couldn't figure out how to adjust it. It changes records fine and sets down just fine. One more question: did these use a sodium or crystal pickup? Mine works so far. It is a model D-1344.

Edit: Moved this here as I think this is the better spot for this.

   

No matter where you go, there you are.
#2

Actually this is best in Philco Electronic Restoration so I moved it there (here).

--
Ron Ramirez
Ferdinand IN
#3

Ok. I didn't know as this is kinda straddling the electronic and mechanical sides of things.

No matter where you go, there you are.
#4

Yeah, Philco Home Radios is intended for general discussions of Philcos, what you found and where, is a 38-690 better than a 37-690, etc.

Getting them going again is for Philco Electronic Restoration.

I've considered adding a phono repair section but I think we have too many subforums already...and too many people are not aware of the others further down the Phorum home page.

Now, after all that, I'm afraid I haven't helped you a bit on your phono issue. As I have seldom ever messed with phono mechanisms, I'll have to leave that to others more experienced than I.

--
Ron Ramirez
Ferdinand IN
#5

Chuck has some info for me, but I still need to know if this is an M26 changer or not. That's the main thing that has me on hold now. Once I am sure what model it is, I think things can move forward. Icon_smile It is neat to watch in action, the spindle 'nods' towards the post to drop the records.

No matter where you go, there you are.
#6

The picture above matches the M-26. The M-24 was a "little brother" to the 26, with no shut-off after last record, different color of plastic part, etc. Also, the M-28 was essentially the same as the 26, but with improved motor, anti-resonant tonearm, hi-fi cartridge, etc... all on same PR-2829 bulletin.

{Just added, later that same afternoon...}

The M-26 changer is/was used in the D-1344 portable record player from the 'model year' 1956. Bulletin is dated Sept. 1955. Like I'd menbtioned above. Late 1955 intro for the 1956 model year.

Chuck
#7

Thanks for the help and information. It seems these Philco changers don't see much love with radio guys here, but I think they are kinda neat. Watching the center spindle 'nod' to drop the records is definitely a different take on how a changer works. Seems to work well and drops my 78s a bit more gently than my VM changers do.

No matter where you go, there you are.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Zenith H725
David - I think I understand but what units are you discussing (Low of 1.7, high of 3.9)? Budget constraints for Ham ...EdHolland — 01:43 PM
My Philco 37-116 Restore
You're doing great. I wish I could be more involved, but my mind is right now preoccupied with the reason I am here in ...morzh — 12:21 PM
My Philco 37-116 Restore
Hope you guys are still with me. I have moved on to the alignment. I completed the IF alignment which was pretty muc...dconant — 10:47 AM
My Philco 37-116 Restore
Hello MrFixr55, Thank you for taking the time to explain. I measured 50 volts where you say. Today the 370 volts at ...dconant — 12:51 PM
462ron
Oh that sucks. It’s something easily overlooked. Hopefully it’s nothing more than a resistor! Ron462ron — 08:08 AM
Philco 46-480 Electronic Restoration
Just confirmed that you are correct. It’s the function generator. I connected the signal output probe to one of the inpu...jrblasde — 07:52 AM
Philco 46-480 Electronic Restoration
Ouch, you may be right. Yes, it is solid state. It’s the signal output of my oscilloscope. May be time to crack that ...jrblasde — 07:27 AM
462ron
If you didn’t put a DC blocking cap between the signal generator probe and the plate of the 1st IF it’s possible you ble...462ron — 07:07 AM
My Philco 37-116 Restore
Hi DConnant, The reason why C127 is isolated from ground is because sets of this vintage did not have the center tap...MrFixr55 — 01:07 AM
Philco 46-480 Electronic Restoration
The shield is on the 6H6. It was, in fact, a missing jumper to connect the main chassis ground to the RF chassis grou...jrblasde — 10:58 PM

[-]
Who's Online
There are currently 1021 online users. [Complete List]
» 2 Member(s) | 1019 Guest(s)
AvatarAvatar

>