Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 37-675 for $50
#1

It appears that the prices for non-primo conditon radios has dropped quite a bit on ebay. I was the only bidder on a 37-675 that appears to be in good condtion but needs restoration. For $50 even the chassis is worth that much but to get a complete 675 for $50 is nice.
#2

Wow, what a steal! I didn't even see that one.

--
Ron Ramirez
Ferdinand IN
#3

I think I saw that one on eBay too. It was/is a De Luxe model, right? Congrats! 8)

Now why did this model originally cost so much more ($275) than the 37-116x ($195)? The 37-675x only has one central speaker, 12 tubes, and is not 'high fidelity' whereas the 37-116x had 4 speakers, 15 tubes, and IS high fidelity? I don't get it.
#4

http://cgi.ebay.com/370059057990 Not in mint condition but it is complete and shouldn't be that hard to restore.
#5

Claude, I almost bid on that. But the drive to get it, turned me off for right now. I was all set to hit that bid button, then I decided not to with about 30 seconds to go Icon_arrow Nice catch Icon_wink

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#6

I guess as with many of the 37 models you could get this one with the shadow meter or without and this one is without (magnetic tuning). It really appears to be a lot like my 38-1 with PP 6F6's with a 6F6 driver so the output should be 12-15 watts. It has 2 IF stages so it should have decent performance, I have someone that is willing to wrap it up and toss it on a greyhound bus so that covers the shipping issue. For the price with shipping I might have ~100-120 into this radio so that isn't too bad. Actually it is probably a better performer than the 38-1, when I went back I noticed the 38-1 doesn't have a 2nd IF and rather than using a 6J5 as an inverter feeding a 6F6 driver to the PP 6F6 outputs the 38-1 using a 6J5 inverter feeding two 6J5 drivers to the PP 6F6 outputs sucking up one extra tube for the same result.
PhilcoBenz, more than likely the $275 was a typo and it should have been $175. Normally there was about $15-25 difference between the standard and Deluxe model in 37 so I think the price was more like $175. The one nice thing is that the Deluxe model was the less produced model of the two types with the standard being over triple the total of the Deluxe.
#7

You got a good deal on that set and you won't be disappointed in its performance. I restored a standard set a few years ago and was very impressed with it. I ended up selling it but it was tough to do. I have a 16X that I am going to keep and the two were a little too close electrically to justify keeping them both.

Sean
WØKPX




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Hippo 46-420 Schematic doesn't match parts list.
Here you have the part in the sch with values. I am not sure what else is needed.morzh — 02:56 PM
Restoring Philco 37-604C
Ron Here are the two of my jigs side by side. They have been with me about the same time (a couple of month differenc...morzh — 02:05 PM
Kurt P
Terry, gotcha, thanks for the clarification.  That’s probably why the speaker seems shorted.  Assuming the OT/FC/speaker...Kurt P — 10:59 AM
Radiola 18 Amplifier & PS
I have the 2.25V and 2.5V information confused, and must look more carefully at the schematic and Hammond transformer in...TN Allen — 10:24 AM
Radiola 18 Amplifier & PS
Thank you for the information, it all helps, although understanding some of it takes time. One reason for doing the PS a...TN Allen — 09:42 AM
462ron
Hi Mike, the radio is coming along nicely but wow, you must have some serious moisture in your shop judging by the amoun...462ron — 06:29 AM
Restoring Philco 37-604C
Have rebuilt the can. The can had 4 caps in it, 2x16uF, 10uF and 8uF. I used a 15uF as the first cap, 22uF and 10uF ...morzh — 09:38 PM
Philco 89B code 123 newbie
The flat copper wires are from the hum bucking coil. All of the other resistances seem to be OK.Radioroslyn — 04:15 PM
Help with weston 669
I need help with my 669 meter. I recapped it becausing it was pegging the meter out. Now the neon light comes on (not su...daveone23 — 02:42 PM
Philco 89B code 123 newbie
I may be incorrect but you should measure around few ohms for the voice coil. In addition you may have a hum bucking coi...RodB — 02:29 PM

[-]
Who's Online
There are currently 4462 online users. [Complete List]
» 1 Member(s) | 4461 Guest(s)
Avatar

>