Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Are there specific applications for the two types, or is it a matter of personal preference between these resistors?
I have been buying the metal film type. Now I am in need of some 75K and 750K which I have found at Mouser. So I am wondering which to get.
Thanks for any input.
Gene
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
metal film is good and cheaper than carbon.
I like metal oxide as it is the cheapest and at 5% tolerance has the highest working temp up to 200 C (metal film - up to 155C). Metal film has better stability over temperature.
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I've noticed that often one is cheaper then the other depending on the resistance value, both are far cheaper then carbon comp resistors though.
Supposedly they also have voltage ratings, but I have never had a 1/2 Watter arc over in any radio that I repaired so I guess the 400 v rating is high enough.
Regards
Arran
(This post was last modified: 02-20-2014, 02:33 AM by
Arran.)
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Thanks for the replies!
Gene
Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
Standard 1/2 metal film are rated for 350 volts, but you can also get them at 500 and 700 for about the same price.
Here is Mouser's selection of 1/2W, 700v metal film resistors.
http://www.mouser.com/Passive-Components...pyZ1z0x85h