Posts: 228
Threads: 64
Joined: Dec 2013
City: Northbrook, IL
Hi,
As I am almost finished restoring my 38-2670 and 71B, I was wondering about this console. There is one available, albeit w/o "mystery control". How complicated is it? I do not want to go over my head as it almost happened to me with the 38-2670 (RF section), but I survived ( with your help, guys) and enjoyed after that doing the 71B, it was like a picnic. Thanks in advance for advice.
Posts: 16,266
Threads: 566
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
It will be fairly intense. Even for an experienced guy. But...not impossible.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Adapting/programming a mystery control is tricky, but Ron has some excellent documentation about this in another series of threads.
Posts: 228
Threads: 64
Joined: Dec 2013
City: Northbrook, IL
@ Morzh "...intense...but not impossible".
That sounds enticing and time consuming at the same time, as with one radio per month average (it is my output now,retired and bored otherwise), we will need more of a living space. On the serious note though, they are asking
$300.00, untested, no remote, nice cabinet. You think it is a fair number?
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
If the cabinet is nice I would go for it as I have always wanted a Mystery control set. There seems to be plenty of the remotes around so you should have no problem getting one of them.
Have Fun!
Gregb
Posts: 16,266
Threads: 566
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
From what I've seen sold, with nice cabinet and NOT rusty/otherwise in a bad shape chassis and speaker, yes, an acceptable price. Not that you couldn't try to haggle.
Posts: 4,816
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
No, $300 is way to much for one without the remote in non working condition. These sets have yards of rubber covered wire in them, that alone is a reason to pay as little as possible for one. The squarish cabinet 1939-42 Philco consoles are not really that well liked, they are also not that rare, so it does not make any sense to pay a brand Z shutterdial sort of price for one.
Regards
Arran
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
Hey Aaron, if you come across a Mystery control set in good shape for less than that please let me know. I have been looking for one for years and have yet to find one.
Gregb
Posts: 228
Threads: 64
Joined: Dec 2013
City: Northbrook, IL
@Arran,
My wife salutes you, Arran. She is also not happy with the appearance of it.
Well, now it is two against one.I'll see what I can do.Besides, even if the main unit is operational, there is no way to test the remote control receiver part of the unit which is,I believe, 5 tube business plus number of mechanical relays and ratchet mechanism. Decisions, decisions.
Posts: 4,816
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
I have found at least two in my area, and several other 1939-42 Philco consoles with squarish cabinets, Philco had a distributor in the region as did G.E. In the case of the one I was thinking of getting the guy was more interested in playing email tag then actually meeting up, so I lost interest, it was a shame because he also had a Philco 118B, but whatever. I was not that desperate to get one because I already have my fill of consoles, and, in the case of the 39-116/39-3116, the radio receiver itself isn't really anything special, five of the tubes are dedicated to the wireless remote circuitry. If you want one bad enough start hitting the swap meets in the U.S Midwest during the summer, or get Klaus to pick one up for you if he goes down there.
Regards
Arran
(This post was last modified: 02-22-2014, 04:28 AM by Arran.)
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
An attempt to remove the Field Coil from a G speaker
|
| Mike;
I've only run into a speaker with an open filed coil twice, and they were on newer speakers from the 1940s. One ...Arran — 12:48 AM |
|
An attempt to remove the Field Coil from a G speaker
|
| Arran
Yes, this is my plan for now and what do I got to lose, this is not even the speaker from this radio, but one o...morzh — 10:44 PM |
|
An attempt to remove the Field Coil from a G speaker
|
| Mike;
I would unwrap the field coil, and see if maybe there a break near one of the ends, like where the coil wire att...Arran — 10:23 PM |
|
An attempt to remove the Field Coil from a G speaker
|
| ...and this is what I did. I fed a little LT into the screwholes with a small brush, and a little on the rim next to the...morzh — 09:52 PM |
|
Philco 40-120C Restoration
|
| I combined the two 40-120C threads together as we like to keep the discussion of the same radio together. It helps with...klondike98 — 09:36 PM |
|
Philco 40-120C Weak, Distorted Ouput
|
| Just checked were I buy tubes price is four dollars. So living in Florid we have a local source for tubes. David David — 09:14 PM |
|
Philco 40-120C Weak, Distorted Ouput
|
| The higher voltage may be due to higher mains voltage. My mains run 120-125AC when the set was new mains would be 110-11...David — 09:09 PM |
|
Philco 40-120C Weak, Distorted Ouput
|
| Thank you for your reply. I pulled a speaker from a Philco 41-221 and received the same result. I used a signal tracer t...bluecap — 08:45 PM |
|
Philco 40-120C Weak, Distorted Ouput
|
| Have you tried a different speaker?
How did you trace the distortion?
How do you know it is weak? What is the reference?...morzh — 08:33 PM |
|
Philco 46-480 Electronic Restoration
|
| Amen to that! Every time I think I’ve captured them all, I realize that there’s another error. My goal is to finish with...jrblasde — 07:00 PM |
|
Who's Online
|
There are currently 4773 online users. [Complete List]
» 1 Member(s) | 4772 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
