Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A 20 dollar Craigslist find
#1

Up front, let me say that the pic is DEFINITELY an "after" one.

"Before" it had no speaker or dial glass, was filthy, and the chassis required me to rebuild the antenna coil, fabricate an RF choke, and un-do about a third of ALL the wiring due to some previous owner.

YES, I got it from one of the more,...uh..... "colorful" individuals I have met since I have been in the hobby. He was a tube collector who cataloged all his tubes by (drum roll): WHO he got the tubes from and the DATE he got them.

He wanted TOP DOLLAR for tubes BUT didn't care a whit about this set.

   
#2

Oh yeah, it's a Zenith 12S265.
#3

Tom,

Start sharing you luck.
Didn't they teach you in daycare - you gotta share!

Where's my X 12-tube set for...OK.....$60.
Where, I am asking you!
#4

I'll give you $70.
THat's a rare find for sure.
murf
#5

TA When did you purchase the set? Did you run away with the radio after you gave the guy the 20 dollar bill, because you stole that radio!
#6

Did he pull all the tubes out before he let you take it?

It's not how bad you mess up, it's how well you can recover.
#7

No tubes were in any radio he had. Go figure, right?
#8

Purchased several months ago. Took awhile to get 'er done.
#9

Nice find, and even nicer work on it! Just goes to show there are still deals to be found if one is patient.
#10

The Z was an extreme example of a "good deal." I am not a Z guy, but for the price..... who could turn it down!

But agree that the deals are still out there. The more folks that know you are a "radio-man," the more opportunities you will have presented to you.




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit.  That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM
Shadow Meter Bulb
Ross I am not sure what current limiting effect the incandescent provides. They are two different parts of the sch...morzh — 08:31 PM

[-]
Who's Online
There are currently 4660 online users. [Complete List]
» 1 Member(s) | 4659 Guest(s)
Avatar

>