Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Found this locally, 200.00. Cabinet/chassis in VERY nice shape. 24 tubes.
It was a playing set that had been refreshed by it's previous owner 20+ yeas ago. I decided to inspect the electronics anyway and replaced all electrolytics and some other components just to be sure. The Scott has nearly all metal cased caps. Very well built AND HEAVY.
Since the set was on the second floor of the previous owner's home, it was a challenge for 2-1/2 old men (I was the 1/2) to move it. I ended up removing both chassis, record player, and speaker to make it merely extremely difficult to move.
It is a very good sounding set! Color me impressed!!
Posts: 1,106
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
Color ME jealous.  I've spent way more than that on just the chassis'. No speaker, no cabinet, no phono. Just in the wrong place at the wrong (always) time.
Posts: 141
Threads: 13
Joined: Sep 2011
City: moline, il
Well done Sir. I have the chassis/speaker from one of these in my garage as my outside radio. There were almost 10,000 of these sold new and if you ignore the idiots on ebay with their crazy asking prices, you can usually find these in the 200-400 range for a nice one with original cabinet. I bought a Moderne blonde one last year up in Rockford off ebay. Cabinet was rougher than I thought but its a seldom seen cabinet.
My friend Keith in Des Moines is looking for the 800B cabinet slide rails for the main chassis if anyone has a set. Turns out there were several rail designs and he has a mismatch between his chassis and the cabinet.
Posts: 16,582
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I am somewhat jealous but only somewhat - I made a conscious decision to forgo that 800 that was sold in PA less than 100 miles from me with that other radio for as I remember about 100 bucks or so.
Still - a great find, not every day a Scott 800 appears for such an affordable price.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
It's a very large cabinet and is newer (1946) than what I normally am into.
The sound and reception is excellent. I may keep it or I may not. But for now I LIKE it.
Posts: 16,582
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I'd be surprised if you didn't. It is Scott after all. What's not to like!
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Nice find and excellent price TA. Those are hernias waiting to happen. I did install casters on mine so the base sets about 1/8" off the tile floor. Certainly makes it easier to move for floor cleaning.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
No matter where you go, there you are.
Posts: 1,106
Threads: 88
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
Jerry,
The two chassis' alone are hernias waiting to happen (or slipped discs!)
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Right you are, Brenda!!!! Both chassis are VERY heavy!!!
I installed MANY felt pads under the cabinet feet in order to slide it over the hardwood floor, which in the pic is hidden under my 111 pound Chinese dog Yogi and his quilt.
Moving the set on hardwood floors is just difficult now. Originally I was going to have the set in my bedroom, but moving it across the rug in my room might prove to be my un-doing.
Brenda: the chassis is nice looking to the point that you might want to consider having it sitting exposed on top of some kind of speaker cabinet.
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
Scott must have been taking a page out of the Majestic handbook concerning weight!  Still, even I wouldn't turn one down if I found one I could afford and had the space.
No matter where you go, there you are.
Posts: 141
Threads: 13
Joined: Sep 2011
City: moline, il
Mine is displayed in my garage on one of those adjustable chrome shelving units sold at Target or Lowes.
I spent 2 days cleaning the chrome on mine and I have the 15" speaker firing down to the floor on the bottom shelf.
My chassis were filthy but all that dirt preserved the chrome underneath nicely.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Great find, Tom, congrats! 
--
Ron Ramirez
Ferdinand IN
Posts: 674
Threads: 146
Joined: Jun 2011
City: Elko,MN.
Also like the Philco parked next to it.
Nice find for sure.
murf
Posts: 38
Threads: 17
Joined: Aug 2011
City: Nanuet, NY
Where did you find the room to put it????
Nice find Tom
Rock
Users browsing this thread:
|
|
Recent Posts
|
|
Philco Model 38-7: what caps & resistors do fail typically?
|
| Since you stated earlier, you have a console 38-7XX. They also had a 38-7T (table), and 38-7CS (chairside). A very nic...GarySP — 01:18 PM |
|
Part numbers to model cross
|
| That I wouldn't know, but sometimes the radio document itself shows one, same as the capacitor cans' etc pinouts.morzh — 12:46 PM |
|
Part numbers to model cross
|
| Thank you morzh, that is exactly what I was looking for. Now , is there some where that shows pinouts for Philco power ...Jim Dutridge — 11:37 AM |
|
Restoration of the Canadian General Electric A-87
|
| Thanks for your help Michael. In fact, this video is only an intermediate result. Later I had to apply another tinting l...RadioSvit — 09:01 AM |
|
Restoration of the Canadian General Electric A-87
|
| Great job on the cabinet.
PS. In the US notation, "kenotron" refers to specific type of tubes; we call re...morzh — 08:24 AM |
|
Part numbers to model cross
|
|
This document has at least some tables of models and parts used.
Example: Choke 32-7572, used in 604 radio.
Search f...morzh — 08:19 AM |
|
Restoration of the Canadian General Electric A-87
|
| I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM |
|
Restoration of the Canadian General Electric A-87
|
|
Well... While the varnish is drying up, I started repairing the chassis...
Of course I started by replacing the pa...RadioSvit — 07:12 AM |
|
Philco Model 38-7: what caps & resistors do fail typically?
|
| Hello Martin,
Welcome aboard our little community what great Model 38-7
Sincerely Richardradiorich — 12:30 AM |
|
Philco Model 38-7: what caps & resistors do fail typically?
|
| Welcome to the Phorum Martin.
I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
