A Philco Super 71 Slideshow (and a Super 89 slideshow too!)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I created a Photobucket slideshow to illustrate the restoration/modification of my Philco Super 71.
Note from admin: Sorry, slideshow is no longer available. Click here to see complete details of the "Super" 71 conversion:
http://philcoradio.com/phorum/showthread.php?tid=14917
As a side note, the job is still not yet 100% complete; it still needs the proper knobs, and I need to finish painting the large tube shield.
--
Ron Ramirez
Ferdinand IN
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Wow, Ron,
Beautiful job!!! I had to install Adobe Flashplayer 9, so I did. My 'pooter's been in the Stoneage for a while, sorta like taking a long flight aboard a DC 1.
Mike
Posts: 1,400
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
Ron, that's a beautiful radio! I'm still planing on doing your super oscillator mod on my model 19. It was really rough when I got it, rusty chassis, most of the veneer along with the next layer underneath on the front arch was missing. I have finished restoring the chassis and the cabinet. It looks pretty good considering what I had to start with. It's one of those that if you stand back about ten feet it looks very good. But it will never be a museum piece. So I have no quams about experimenting with it. If it works out, I may try the mod on a 91 I have. But I'm still between houses and without a work bench. I'm thinking by fall things will be gitting back to normal and I will be able to work on some radios.
Steve
M R Radios C M Tubes
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Thanks, guys. I have a Model 89 upon which I plan to perform this mod. It is at the painted-bare chassis stage; all of the tube sockets and parts need to be reinstalled. But with so many radios here to work on for others, the 89 mod is on the back burner for now.
--
Ron Ramirez
Ferdinand IN
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Just for fun, I have put together a slideshow which illustrates what I have done with my "Super 89" project:
Note from admin: Sorry, slideshow is no longer available. Click here to see complete details of the "Super" 89 conversion:
http://philcoradio.com/phorum/showthread.php?tid=14918
--
Ron Ramirez
Ferdinand IN
Posts: 1,400
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
Ron, it looks like your 89 chassis came out of the same shed as mine.
Steve
M R Radios C M Tubes
Posts: 237
Threads: 24
Joined: Dec 2007
City: Gladwin, MI
Very nice job on both chassis, Ron. Also, the Philco 70 cabinet refinishing is beautiful. What is a Super 71? My Philco Radio book only seems to list a model 71B.
Oops! Nevermind. I just read this thread. http://www.philcoradio.com/phorum/showth...p?tid=1035
Now I understand.
Ed
Posts: 1,400
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
Ed, the Philco models 71 and 89 along with several other models used a type 36 tube as the oscillator. It was a marginal circuit design that was very problematic. Ron has redesigned the circuit to use a type 6A7 tube as the oscillator, hence "super".
Oops, too late! Steve
M R Radios C M Tubes
Posts: 237
Threads: 24
Joined: Dec 2007
City: Gladwin, MI
Thanks anyway for the response, Steve.
Ed
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
The 70 cabinet housing my Super 71 chassis is another Barry Jones refinish job.
--
Ron Ramirez
Ferdinand IN
Posts: 237
Threads: 24
Joined: Dec 2007
City: Gladwin, MI
Barry does very nice work. It takes a great amount of skill and patience to achieve that level of finishing.
Ed
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
He's getting my 116B cabinet. Then my 650B
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Rare zenith 6s137 restore
|
All of these restorations are two projects. The chassis and the cabinet. You're done with the chassis.
I would keep ...RodB — 01:29 PM |
PT-6 antenna connections
|
Thanks. The transformer tested per your numbers. Checked the wiring and it appears to be good. I’ll move on to checking ...bridkarl — 12:37 PM |
GE Model P-975F
|
There are 2 of these on ePay and several pics on Radiomuseum. Although the front looks like a very popular Hong Kong ra...MrFixr55 — 09:26 AM |
Rare zenith 6s137 restore
|
Hi Fred,
I get things to work, but what you, Russ, RadioSvit and many others on the Phorum do with cabinet and chassis...MrFixr55 — 09:02 AM |
PT-6 antenna connections
|
Hi Bridcarl
+1 on the others. Pin 6 of the 7C6 is the AVC Diode so it is appropriate that that pin 4 of the coil con...MrFixr55 — 07:30 AM |
462ron
|
Joseph, this is beyond awesome. A lot of thought and engineering went into this and you hit a home run! Now I must save ...462ron — 07:27 AM |
Cannot Adjust an IF Transformer’s cores
|
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM |
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
Who's Online
|
There are currently 4464 online users. [Complete List] » 1 Member(s) | 4463 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|