Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco knob colors
#1

While restoring a couple of mid to late '30s Philcos,I noticed that some of the knobs on these sets are black while others are brownish/mahogany.What is correct color knob for the years '35 thru '38?
73 de Bill W4NJF
#2

Generally black from what I know & own. The brown ones were used on later 40 and up sets. Again, I'm not 100% sure of that.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#3

From what I have seen which is limited to 1936 and 1937 models, 1936 models have black knobs and 1937 models are brown knobs. The limited number of pre 1936 models I have seen have black knobs. The 1938 models I have seen had brown knobs. After 1938 I have no clue.

Bill

It's not what you don't know that hurts you it's what you know that's not so.
#4

Are we talking a very dark brown? Almost indistinguishable between black? I've noticed this on 37/38 sets.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#5

Ah So! I think I'm getting a consensus of opinion here,and it looks like "36 and earlier knobs are black and '37 and later knobs are brown.
Am i reading this correctly?
73 de bill
#6

Bill Fulling Wrote:Ah So! I think I'm getting a consensus of opinion here,and it looks like "36 and earlier knobs are black and '37 and later knobs are brown.
Am i reading this correctly?
73 de bill

That's the way I see it. We need to hear from Ron or chuck to know for sure.

Bill

It's not what you don't know that hurts you it's what you know that's not so.
#7

Again, are there a lighter brown, or a very dark brown? Later ones from the 40s(possibly 39) are a lighter brown depending.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#8

1935 season - Hex or "acorn" style on most Philco models, except for Model 16, late version 144, and 97 with concentric tuning knobs; these used knobs with a sort of octagonal shape. I've seen these in black, and very dark brown.

1936 season - New knobs except for the cheaper models; all black.

1937 through 1940 seasons - Same style round knobs as most 1936 models, except they are brown instead of black. The band switch knobs on 1937 and 1938 models are VERY different from the bar knob used on some 1936 models only.

1941 season - A new knob made of Tenite, smaller than previous (1937-40) knobs.

--
Ron Ramirez
Ferdinand IN
#9

Thanks Ron! I wasn't sure about this but it had me scratching my head-why would Philco use knobs where the colors were noticeablly different on the same set.
73 de Bill




Users browsing this thread: 4 Guest(s)
[-]
Recent Posts
Value of capacitor
If this helps you sort it out just remember 10,000 mmfd or pf = .01 mfd. So 5,000mmfd = .005 mfd.Radioroslyn — 04:23 PM
Value of capacitor
OP here- the parts list calls for an .005 1000 volt mica. It currently has an .005 1000 volt electrolytic that is at lea...bridkarl — 02:09 PM
Value of capacitor
Maybe it's one of those paper caps that is wrapped in a mica-lookiing case.RodB — 01:51 PM
Value of capacitor
I also was wondering what the post about using polarized caps had to do with the subject? The cap is 5nF, does not exis...morzh — 10:22 AM
Value of capacitor
The OP stated that there is an electrolytic in the circuit in place of the coupling cap and wondered what effect it has....RodB — 09:53 AM
Value of capacitor
According to AI... ...assuming the electrolytic that's in it now is polarized... What does your response have to ...DaleHCook — 08:17 AM
Philco 50-925 antenna connections
Most loop antenna setups are either one continuous loop with two connections or 2 loops with 4 connections. The latter c...RodB — 02:16 PM
Value of capacitor
Not trying to answer for the OP, just commenting on the thread. According to AI... ...assuming the electrolytic that'...HowardWoodard — 02:09 PM
Philco 50-925 antenna connections
Hello Keith! I've updated your thread with the proper model number. Take care, - GaryGarySP — 01:10 PM
Value of capacitor
Why are you having to replace it? Does it measure out of tolerance? Is it mechanically damaged?DaleHCook — 07:50 AM

[-]
Who's Online
There are currently 2667 online users. [Complete List]
» 2 Member(s) | 2665 Guest(s)
AvatarAvatar

>