Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Will this transformer work in my 38-7?
#1

32-7833N is the Philco part number. Someone on the ARF has one that I'll buy from him if it will work.

TIA
#2

Hi Brenda, you've probably seen this, but here are the specs for that transformer:

http://www.antiqueradios.com/forums/view...hp?t=32876

It looks very close, I can't find the exact B voltage of the 38-7.
#3

Here's another interesting page: http://www.oldradioparts.com/2a23efl.txt

4593-004 POWER PHILCO 32-7833 320-0-320V @85ma, 5V 2A, 6.3V 2.5A, MODEL 38-7/8/9


Looks close enough to me.
#4

I'm not really seeing what you are referring to there.
#5

I apologize, somehow I misread the first link.

At any rate, the second link I posted shows part number 32-7833 as correct for the 38-7.
#6

Yes, thank you. Icon_smile
#7

Just in case my other offer falls through, will this one work?

32 8137n




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Hickok 288x
One problem i noticed is there is no real voltage on the 31 caps, 20uf elec. On the probes, good machine X1=8ohms X10...daveone23 — 02:50 PM
Replicating (dogbone) resistors what method have you used ?
John did you see the domino style capacitors that he made too. No, I did not see those Richard. I'll have to try and...Eliot Ness — 02:19 PM
Philco 89B code 123 newbie
Back to working on this, pretty much everything is done minus the RF coil, which I'm putting off until last.  Thanks for...Kurt P — 02:07 PM
Does the 20 Deluxe use photofinish?
I recently bought a can of oms and it now says Lo-odor mineral spirits. When I use citrus stripper I leave it on for...RodB — 11:09 AM
Does the 20 Deluxe use photofinish?
It's on a scale of how bad is it compared to... Naphtha, chlorine bleach, mek, and lacquer thinner it's odorless.Radioroslyn — 10:26 AM
Does the 20 Deluxe use photofinish?
Yeah, always wondered why they call them spirits "odorless". It sure enough smell like a gas station.morzh — 10:10 AM
Does the 20 Deluxe use photofinish?
I usually don't do any sanding till all the stripping is done. The veneer on the cabinet is thin and it is easy to sand ...Radioroslyn — 09:49 AM
HiFi (Chifi) tube amp build - but my own design.
As I remember it, the shock from that B+, about 250VDC, felt worse than the shocks I experienced from 220VAC.morzh — 09:14 AM
Hickok 288x
They worked for 85 years as .05's and my other machine which operated perfectly has them. Doubt thats the issue. What ty...daveone23 — 09:01 AM
462ron
LOL@ MrFixr. I remember an encounter with my first tube radio.. I think I have posted this before. Back when I knew just...462ron — 08:07 AM

[-]
Who's Online
There are currently 3354 online users. [Complete List]
» 2 Member(s) | 3352 Guest(s)
AvatarAvatar

>