Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 71 cabinet refinish
#1

This Model 71 was purchased new by my wife's grandparents in 1932. Her father gave it to us this past Christmas. Needed a LOT of work, as you can imagine. The radio chassis is over at a friend's place being worked on, so my wife & I tackled the cabinet. This is what it looked like when we got it:

[Image: http://i.imgur.com/YkRgrvcl.jpg]

And what it looks like now:

[Image: http://i.imgur.com/RTm7HTol.jpg]

Removed the old finish with acetone & #0000 steel wool. Used three Mohawk toners to redo it: perfect brown on the sides, brown mahogany on the trim, and dark walnut in the center. The logo is a decal and the grill cloth is a reproduction from eBay.

Doesn't look too bad for our first effort! It helps that my wife is a woodworker. Icon_smile
#2

Looks great, something to be proud of.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4032 online users. [Complete List]
» 3 Member(s) | 4029 Guest(s)
AvatarAvatarAvatar

>