Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
No matter where you go, there you are.
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
nice project, Looks heavy
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Keep the stove but find a radio chassis that is less rusted.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
Most AKs you find around here have some rust on the inside. It's that wonderful, humid Ohio air. I doubt finding another complete chassis is going to happen as this one is a bit different from the AK breadboxes I have lying around. For one thing, this unit has a regular electro-dynamic speaker, not the early high-impedance units. It's an eight tube chassis that appears to use push-pull 71's as outputs. Also, I think the 'chassis' is actually part of the cabinet. It appears you can pull out the RF deck and transformer deck separately, but that's it. Actually, it looks like getting the parts out might be a real pill. The original AK instructions even mentions having to cut some wires! Eek!
No matter where you go, there you are.
Posts: 16,495
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Not so long ago Terry got one.
Posts: 3,152
Threads: 56
Joined: Apr 2011
City: Lexington, KY
Good score! Those are not seen everyday so you did well. I like small funky consoles like those.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Large knob on left is from an earlier AK set.
Posts: 7,300
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
Yep it IS heavy. I was wondering about the knob. I wonder if the spare knob from my parts 42 might be a better match or just leave it be?
No matter where you go, there you are.
Posts: 1,469
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Wow nice tind! But I would not liked to be zapped Leaning on a all metal radio if the electronic was not up to par....Wow wee...
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
I think the AK-42 knob would work.
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
A picture with the correct knobs now installed. Makes the radio look a good bit different. Also, got the tuner sort of loose. Two of the gangs turn, but the drive belt for the third is damaged and it appears someone has loosed the nut on the back, causing all the plates to become mis-aligned! Oh well, that can be corrected and maybe a full tuner alignment will help with performance. Oh, the transformer appears good, so major plus there!
No matter where you go, there you are.
Posts: 3,152
Threads: 56
Joined: Apr 2011
City: Lexington, KY
If you need a new belt Adams sells replacement bronze belts for A.K.'s:
http://www.adamsradio.com/
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
Thanks! I'll have to see if the broken belt is the long or short one.
No matter where you go, there you are.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco model 40-100
|
Arran, I restored 2 Canadian battery-crank telephones for a friend a while ago, a Northern Electric (Canadian version of...MrFixr55 — 08:04 AM |
Road Trip for a Philco 46-480
|
Beautiful work, a 79 year old radio brought back to life. The first FM radios for me, a little iffy, had some I just cou...Jimradio — 08:01 AM |
Philco 46-480 Electronic Restoration
|
I was a field engineer for a biomedical company for many years. Many was the time that I was driving home from NYC in t...MrFixr55 — 06:40 AM |
Philco 46-480 Electronic Restoration
|
Don't laugh folks, I have not been above taking a chassis into the bathtub (when Ms. Fixr was out of the house), taping ...MrFixr55 — 06:02 AM |
Philco model 40-100
|
Marion;
By "newer style" carbon resistors do you mean the molded type with coloured bands rather then the BE...Arran — 01:00 AM |
Philco 46-480 Electronic Restoration
|
hello jrblasde ,
your radio sounds great well done !!
I bought like 20 years ago a Philco 610b that someone had painte...radiorich — 11:50 PM |
Philco model 40-100
|
Arran,
I just can't tell if the volume control has been replaced. The control has a brass shaft with one half flat for ...mhamby — 11:08 PM |
Philco model 40-100
|
You may be able to make the part out of wood. The particular vendor has a habit of disassembling radios and selling the...MrFixr55 — 10:09 PM |
Philco 46-480 Electronic Restoration
|
Used to get to Bentonville when I worked for a Walmart vendor....nice and sleepy back then. PaulPaul Philco322 — 09:49 PM |
Philco Model 249 made in England
|
Did Garrard produce stand-alone turntables? The reason I ask is, when I was a kid my grandfather gave me a KLH Model 20 ...jrblasde — 09:37 PM |
Who's Online
|
There are currently 576 online users. [Complete List] » 3 Member(s) | 573 Guest(s)
|
|
|

|